15hp merc 1985 idle wire where does it go

harry57

Cadet
Thread starter
Joined
Jul 20, 2006
Messages
6
I was working on my carb and i disconnected the idle wire from
the fast idle lever on the primer unit. it ran under the flywheel
to the trigger assembly which adusts the timing. It came loose
and now i cannot figure out where it fits the trigger assembly
I would appreciate any help. Harry
 

HSEMJ

Seaman Apprentice
Joined
Jun 3, 2005
Messages
33
Re: 15hp merc 1985 idle wire where does it go

If you look closely, there is a small rectangular hole in the arm on the trigger. It's about halfway between the body of the the trigger and the end of the arm where the spark advance linkage attaches. That wire has to be turned on its side and angled to get it in there and then it clips in to the fast idle linkage.

hope that helped, and didn't confuse you more d:)
 

harry57

Cadet
Thread starter
Joined
Jul 20, 2006
Messages
6
Re: 15hp merc 1985 idle wire where does it go

harry57 said:
I was working on my carb and i disconnected the idle wire from
the fast idle lever on the primer unit. it ran under the flywheel
to the trigger assembly which adusts the timing. It came loose
and now i cannot figure out where it fits the trigger assembly
I would appreciate any help. Harry
 
Top