Re: 150hp force outboard has no power to starter or choke
is no the safety switch, if the safety switch is bat or off, still the choke have to work ... with a test light , check for power to the choke when you push the key and for power in the solenoid when you turn the ignition switch to crank position, is no power in ether ways most like it is the ignition switch, now you say that there is power going out of the switch, it could be just for the accessory , by colors track the wires that go to the choke and to the starter, from the ignition switch to the motor, check connectors, I was working in a bayliner that had same problem, and it was the connector that connect the ignition switch with the main harness...also check the harness connector in the motor, ...now if you have power in the solenoid , and I assume is in the yellow wire ,( because the red ..is the battery cable and is steady 12V)...when pushing the key and the solenoid won't click ...two things...bad solenoid or bad ground....to bypass the safety switch , just disconnect it