150 ficht dies at higher speeds

pod

Recruit
Thread starter
Joined
Jul 12, 2003
Messages
2
MOdel: J150ILEUC<br />SN: G04295282<br />I have had this engine since new with the OMC upgrades installed a few years ago. Currently at 370 hrs. I have the diagnostic software and cable but no repair manual.<br />The motor runs fine at lower speeds but needs a passenger to keep squeezing the primer bulb when over 25mph. Otherwize it just dies like the fuel was cut off. This problem has got worse over the last 10 hrs. Now and then it still runs at sustained speed without any help.<br />Any insight and help appreciated.
 

pod

Recruit
Thread starter
Joined
Jul 12, 2003
Messages
2
Re: 150 ficht dies at higher speeds

I seemed to have solved the problem after reading posts on this site for other engines with similar symptoms. I stuck my head under the deck and found that the most hard to get at section of fuel line was cracked and frayed near one end. I relpaced all the hoses from the tank to the motor and the primer bulb. The engine runs great again and the primer bulb stays firm even after sitting idle for several days. :)
 
Top