15 Johnson block removal

thatone123

Banned
Thread starter
Joined
Mar 7, 2009
Messages
707
I have a J15REDS outboard, that was never flushed or even rinsed in fresh water with a worn out block I may rebuild. All of the 6 bolts that hold the block to the chassis were salted and 2 broke off. Does anyone know if and what other bolts need to be taken off to get this block off? Maybe it is salt welded on - I don't know, but I think there are some more bolts or something holding it on. The engine schematic on the parts company's does not seem to show anything clearly or at all.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Did you take the 3 bolts out that hold the powerhead to the pan? Did you disconnect the shifting linkage? They do get stuck down sometimes a little force is necessary.
 

merkdawg0084

Chief Petty Officer
Joined
Oct 11, 2017
Messages
573
As Boobie asked about lower unit, you have to disconnect the shift rod from the lower unit..
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
????----I believe that the 3 screws for the lower cowling / pan do not exist on a 97 model
 

thatone123

Banned
Thread starter
Joined
Mar 7, 2009
Messages
707
Yes, I don't think it has the 3 bolts to the pan on the later models. The lower unit was off, yes, I disconnected the shift lever. From pounding on the engine to hopefully loosen it, I broke off a small piece (protrusion) that is probably not a big deal, but I threw the carcass on the bone heap and have given up for now. Thanks for the answers though guys. I think it is just salted on there as some of the screws were impossibly salted in.
 
Top