100 Johnson Seahorse 1968 Electrical Wiring

jimhoss

Recruit
Thread starter
Joined
Jul 15, 2003
Messages
2
Thank you all for the usefull info on this great site.<br />I recently pulled a 1968 Larson 18 footer and a 68 Johnson 100 horse out of a grove which it had been sitting in for 7 years. The Model number on the engine is V4TL-14B Serial J2937016<br /><br />I cleaned it up put some fresh gas in it and it runs like a dream.<br />However, the wire harness around the engine is rotting and falling apart into a dust. I have attempted to fix what I can with liquid tape and solder.<br /><br />Is it possible to find a wire harness(newer) for cheap, and will it be rotted similar to the old one.<br /><br />I would also appreciate any info people can give me about these engines. (I purchased the Manual already)<br /><br />Thank you Thank you Thank you
 

jimhoss

Recruit
Thread starter
Joined
Jul 15, 2003
Messages
2
Re: 100 Johnson Seahorse 1968 Electrical Wiring

Thanks for the reply Bubbakat<br />however that info did not help me very much.<br />I am confused do they sell wire harness'? I could not find them. Also from what others are saying on this site the engine seems to be a stable but gas guzzling motor. Is it worth purchasing a harness if the engine runs like a dream now. I would hate to be on the water and have a short. Any help would be appreciated.
 

bubbakat

Captain
Joined
Oct 29, 2002
Messages
3,110
Re: 100 Johnson Seahorse 1968 Electrical Wiring

I can't think of a site that sells wiring harness for a motor that age but I have made my own for some i've had,just did one on my 61 75 hp johnson.<br /> get you a manuel and replace wire with same size wire and ends . I have found napa parts stores carry most of the materials I need. <br />As for the gas guzzling i never even worry about the amount of gas it use unless it over uses and then I start checking<br />try this site might helphttp://www.twincityoutboards.com/
 

OBJ

Supreme Mariner
Joined
Dec 27, 2002
Messages
10,161
Re: 100 Johnson Seahorse 1968 Electrical Wiring

Squatter....search for Rapair on the web....I "think" you may be able to get an engine harness there. I know they do offer some harness' for older OMC engines.
 
Top