Search results

  1. B

    1975 85hp. No spark

    FYI. Took starter apart and cleaned and lubed it. Voltage improved to 120 Vdc. Still no spark. Found an old post that said to open the cannon connector to the front of the boat. Fired right up!!!! I had the “kill” wire undone so I don’t know what the issue is. New problem, new search.
  2. B

    1975 Johnson 85hp. No spark.

    I have been fighting the same issue. New cd pack, new coils, new spark plugs. Both sensors test ok, stator ohms good. Low voltage from stator. The one thing I hadnt done was open the big plug to the remote control. When I did that it fired immediately. I had removed the kill wire. I now need...
  3. B

    1975 85hp. No spark

    Thanks for the reply. Its a brand new battery. Took the spark plugs out and tried it. Good voltage!! Now to tear into the starter assembly🥴
  4. B

    1975 85hp. No spark

    I recently bought a 1975 85hp Evinrude with no spark. Compression is good and spins freely. I have the CDI troubleshooting guide and a top of the line test meter (true rms with peak hold). So, here is the situation. Two coils tested bad, and they were all rusty and cracked. Replaced all 4. CD...
  5. B

    Helmut pin removal

    Good idea! Unfortunately i used a punch before i read your post. I know how for next time now.
  6. B

    Helmut pin removal

    I buggered it up pretty bad, but your method worked. Thank you!!
  7. B

    Helmut pin removal

    Trying to remove the outdrive. 1983 Volvo AQ270. The helmut pin doesn’t have the holes for the 1/4” x 20 bolt to remove it. Any trade secrets to get the pin out? Drill and tap and use slide hammer? Here’s what it looks like.
Top