Search results

  1. D

    2003 Chris Craft Launch 25 - VolvoPenta engine replacement - need engine advice

    With that much in labor have the place doing the work get the engine. If there are any problems and the engine needs to come out they should not charge any additional labor. Get a reman 5.7L.
  2. D

    Aluminum DuoProps?

    If I was getting a spare prop I would get another set of SS props. It's not trivial to change the props either.
  3. D

    Eng acts like safety kill switch is engaged.

    Order or download the VP factory manuals. You may have to pay for some. Cannot always download them Have you tried to jiggle the shift lever while still in N. Does it help? Interlock switch adjustment or defective.
  4. D

    New to me boat with VP 5.7GS

    I would send out the carb to be rebuilt by a professional. Many just throw on a carb rebuilt kit but don't get all the passages clean. The professional will use an ultrasonic cleaner. But first check you choke.
  5. D

    Converting a 1994 volvo penta 7.4 to a 1 wire alt from a 5 wired

    Why go to a single wire alternator? They are mainly for hot rods. You need #4 gauge wire, possibly #2 gauge depending on how far away the battery is from the alternator. The problem with a single wire alternator is they don't always properly sense the battery due to load. I would guess...
  6. D

    VP 4.3 GL conversion to Holley Sniper 2 efi

    Send it out to be rebuilt. There is more to rebuilding than just slapping in a rebuild kit.
  7. D

    Looking for replacement heat exchanger

    Get a new heat exchanger at Lenco Coolers. Or MrCool. You could have internal damage in the heat exchanger. I would not bother with the old heat changer.
  8. D

    Volvo Mercruiser Trim Pump Conversion Swap

    Sierra make quality aftermarket marine parts. I would not hesitate to use Sierra marine parts.
  9. D

    SX-A tilt / trim pump replacement tips?

    I just hope it's marine rated. Anything in the bilge like a relay or electric motor needs to be marine rated. Otherwise some gas fumes in the bilge and boom.
  10. D

    Alarm sound when turning the key - starter does not work.

    If your boat has a fuel pump it almost certainly has (or had when manufactured) a neutral safety switch. It would have to be really really old boat you with a mechanical fuel pump before the government required them. Take a short piece of wire and go from the red battery cable going to the...
  11. D

    VP DP-SM drain screw leaking

    What brand of drive trolley and would you recommend it?
  12. D

    Alarm sound when turning the key - starter does not work.

    It looks like the yellow wires coming out of the shift control is the neutral safety switch. And the yellow going into the starter solenoid. If moving the shift control a tad forward and a tad back does not help then start at the yellow wire going to the ignition switch and move along to the...
  13. D

    Alarm sound when turning the key - starter does not work.

    Typically an alarm sounds when starting the engine as there is no oil pressure. Almost certainly the boat has a neutral safety switch that prevents from starting the engine unless the shift is in neutral. If you already have the shift in neutral try turning the key to start and moving the...
  14. D

    Penta 4.3 GL in saltwater?

    You want a oil that is gas rated. Many 15W40 oils are both gas and diesel rated. Just make sure it's at least gas rated. There are a few that are only diesel rated.
  15. D

    Penta 4.3 GL in saltwater?

    You MUST have a marine starter. MUST MUST MUST. The are several companies that sell marine parts at a discount online. Pull the starter and look locally for a place that rebuilds them. They are there. Just need to look. They will do a better job than many of the starters you will find that...
  16. D

    Penta 4.3 GL in saltwater?

    Use 15W40 oil. Shell Rotella T is a favorite of many. No need for synthetic as most people put on less than 50 hours a summer. Riser is also called exhaust elbow. You want the exhaust to leave the engine area pretty high up with respect to the bottom of the boat. So an exhaust elbow or...
  17. D

    Volvo Penta Tool Kits for Drives

    And some need to come from Sweden. Wait until people price out exhaust manifolds or risers with catalytic converter.
  18. D

    Updated Manual Link?

    I ordered manuals from VP website for any that were not downloadable. To do serious work you need to VP manuals. If your VP engine has an ECM you may need a Diacom to read the codes.
  19. D

    Seller says exhaust bellows torn

    With a 27 year old boat you need to worry about soft wood around transom cutout, stringers and flooring.
  20. D

    Seller says exhaust bellows torn

    There can also be situations where the seller is not all that knowledgeable and while there may be things that are broken, the seller is not aware. Some people who do surveys are knowledgeable about the boat systems but not about the engine or outdrive. If I was buying a used boat with an...
Top