Search results

  1. H

    3.0 engine removal

    Any tips or tricks for 3.0 engine removal would be greatly appreciated
  2. H

    3.0l not accelerating/boggy

    Took off valve cover and found no problems, put new coil, wires, NGK plugs, cap and rotor, took the boat out for another test, at idle it sounds normal, at 1500 rpm; slight nock, at 2000 rpm the knock is very noticeable. Looks like a winter project!! Now I have to find a cherry picker with...
  3. H

    3.0l not accelerating/boggy

    Took off the fuel pump and found no problems, spring is place and in good shape, getting ready to take off the valve cover and check that area out, but it just doesn't sound like valve noise..
  4. H

    3.0l not accelerating/boggy

    Hello again, I found the shifting problem, and all is well with that (intermediate shaft splines rounded off) The boat runs smoth and shifts great, however when it gets to 18 RPM it sounds like something is loose, I checked the starter, took the belt off, took the outdrive off but still have...
  5. H

    3.0l not accelerating/boggy

    Thanks for getting back to me, good point about the check valve in Compression tester, I do have the drive off and the U-joints feel good but will check it out running as soon as I get rid of this covid crap, thanks again Hercules
  6. H

    3.0l not accelerating/boggy

    Thanks for getting back to me, now that you bring it up, I Had a similar problem years ago with my snowplow. I did replace the filter, and it looked clean, but I didn't check the gas in glass bottle after it had a chance to settle. The boat has not sat unused for more than a few days, as I go...
  7. H

    3.0l not accelerating/boggy

    Hello: This is my first post to site. I also have a SeaRay 1984 3.0 last week I was going across the lake 2500 rpm, trimed out and all of a sudden the engine just bogged down like it was out of gas, it idels ok, but know I have a "nocking sound" and I can feel it on the gunnels/floor. I...
Top