Search results

  1. Jmitch1102

    Evinrude. 140 Hp. Not charging. The tach is working

    I have a 1990 140hp Evinrude. The tach is working but the charging system is not. I cleaned the terminal connection and verified voltage to the terminal strip. I also tested the purple wire coming from the voltage reg/rec it matches battery voltage. Advancing the rpm it still does not charge...
  2. Jmitch1102

    Evinrude Charging issue but tach is working.

    I have a 1990 140hp Evinrude. The tach is working but the charging system is not. I cleaned the terminal connection and verified voltage to the terminal strip. I also tested the purple wire coming from the voltage reg/rec it matches battery voltage. Advancing the rpm it still does not...
  3. Jmitch1102

    E-tech 150 temperature below freezing

    I have twin e-tech 150’s on a boat at work. It’s currently docked in a river. It’s usually kept in a heated garage. The temps are supposed to be single digits tonight and into the weekend. Should pull it out? or will it be ok to be left on the water all weekend? Even with my personal boats I...
  4. Jmitch1102

    Evinrude main fuse

    Thoughts on changing the main fuse holder? I had a problem with my trim switch shorting the main fuse on a a 1989 Evinrude 140hp. I have since replaced the trim switch. I was thinking of replacing the fuse holder to a 30 amp blade fuse instead of the short 30 amp glass fuse. I have blown it a...
  5. Jmitch1102

    Omc control box identification

    I have what I think is a OEM 1989 Omc controls. The trim switch is not working. I’m trying to find what model controls it is so I can try to locate a replacement switch. Would anyone have any idea what model this is or where I can find one? Thank you
  6. Jmitch1102

    Repair Manuls

    What brand repair manual do you guys recommend getting. I have a 140hp Evinrude.
  7. Jmitch1102

    89 Evinrude stuck in forward gear after new impeller.

    i have a 89 Evinrude 140 that is stuck in forward gear no matter the shifter position including throttle only. I just replsced the water pump. This is the first time out since the new pump. I had the lower in reverse when I took it out and left it in reverse when I realized installed it. The...
  8. Jmitch1102

    Lowrance hook 7

    I recently purchased and installed a hook 7 on the transom of my aluminum deep V. The image seems to have a lot of noise on the screen but clears up a little if I’m move really slow < 1mph. I will try to upload a photo of the transducer mount. Any help would be appreciated. I posted in the...
  9. Jmitch1102

    Lowrance hook 7

    can someone help me with the setup of a hook 7? Or should I leave everything at the default? I’m only fishing inland and no more than 80’ of depth.
  10. Jmitch1102

    89 evinrude timing advance knob

    would anyone have or know where I could locates a timng advance knob for a 1989 evinrude 140 Hp? I just purchased a engine and it is missing it. Any help is greatly appreciated.
  11. Jmitch1102

    140 hp Evinrude WOT issue

    I posted this about a month or so ago but i can't seem to find the old thread. I have a 1989 140 hp Evinrude. It starts and idles. When i got to give it WOT it acts like it wants to rev up then bogs down and wants to cut out if you throttle back it wont die and stays running . I just recently...
  12. Jmitch1102

    140hp Evinrude dies at WOT

    I just bought a 89. 140hp Evinrude. I just installed it in my 1990 sea nymph. I dony know much history of the motor. I checked the compression before o bought it. All the cylinders were around 120-125. I took the boat out today. It started right up and idled fine. When I would give it full...
  13. Jmitch1102

    1989 Evinrude 140 hp wiring

    Does anyone have the wiring schematics for a 89 Evinrude 140 hp? I just purchased one and it has a single red wire that comes from one of the terminals under the power pack and ran into the inside of the boat. It was connected to a small squat box with 2 terminals on it. The box was not...
  14. Jmitch1102

    Lowrance hook 7 to cobra vhf cables

    I got a lowrance hook 7 on Black Friday I would like to hook it to my Cobra MR F45D. The cobra has a jack in the back that is marked GPS. What cable would I need to connect it to y lowrance? Also from reading the lowrance manual. I believe I need to purchase another cable for it. Any help...
Top