Search results

  1. ab59

    What hp 4 stroke should I look at to replace a 1985 evinrude 20 hp 2 stroke. 14 ft crestliner muskie aluminum boat

    I have been kinda keeping an eye out for a 35hp of the 1985 era but people locally seem to want a small fortune for these old motors. Seems like 750 for a junk motor is common. I don't know who would ever buy one for that kind of money, but I am sure not interested. I will make due until I find...
  2. ab59

    What hp 4 stroke should I look at to replace a 1985 evinrude 20 hp 2 stroke. 14 ft crestliner muskie aluminum boat

    It's funny, I saw a youtube clip about changing out the manifold and carburetor for a 35hp of the same era to make the 35. I don't think I'm willing to spend much more on this old motor. Interesting idea though.
  3. ab59

    What hp 4 stroke should I look at to replace a 1985 evinrude 20 hp 2 stroke. 14 ft crestliner muskie aluminum boat

    Lol, I got busy and forgot about this thread. I don't care about speed so much as long as the motor will plain the boat out. I don't trust 2-stroke injected motors, the injection systems have caused a lot of cratered motors. I do not like the smoking, slobbering nature of pre-mix motors. The...
  4. ab59

    What hp 4 stroke should I look at to replace a 1985 evinrude 20 hp 2 stroke. 14 ft crestliner muskie aluminum boat

    Great, using your formula and subtracting the casting decks, I come up with around 725 lbs if I run a 135lb 25 hp merc. that is of course is with a 4 stroke. I am running Lithium batteries so my trolling motor with the single battery that I use is around 65 lbs total. Funny, I bought a Lithium...
  5. ab59

    What hp 4 stroke should I look at to replace a 1985 evinrude 20 hp 2 stroke. 14 ft crestliner muskie aluminum boat

    I bought this 1986 Crestliner 14' v hull muskie model boat with a 20 hp Evinrude 2 stroke motor on it. Although I have replaced a few things on the motor and it runs pretty good, I just want to get rid of the smoking slobbering motor and replace it with a 4-stroke. The weight difference and...
  6. ab59

    1985 evinrude E20CRCO misfire

    I want to run this older gas out of the tank before I begin to tinker with the carburetor. I have a 1986 Mercury 90 hp TOP that could use a link and sync as well. I need a motor manual as well and have not received the one I ordered yet. I'm sure that you are right, the motor has been deprived...
  7. ab59

    1985 evinrude E20CRCO misfire

    18-5179 Ignition Coil Fits for Johnson Evinrude 6hp 15hp 70hp 85hp 88hp 90hp 115hp 120hp 125hp 1985-2001 Replaces 18-5179 582508 183-2508 Pack 2 Brand: Waricaca 4.5 out of 5 stars 42 ratings $28.99$28.99 FREE Returns Get 5% back at Amazon with the...
  8. ab59

    1985 evinrude E20CRCO misfire

    The end result!! It was the power pack. I replaced it today and no more problems. Well other than it does not want to slow idle at all. 3 gal of old gas mixed with 3 gals of new gas and some Sea Foam. I believe the boat sat for a year or more. Going fishing soon and will try to run the gas out...
  9. ab59

    1985 evinrude E20CRCO misfire

    Thanks!!!
  10. ab59

    1985 evinrude E20CRCO misfire

    Ok. I must be missing something here. What purpose would it serve to interchange the spark plugs positions if there is no fire to the wire? Wouldn't the wire still not have spark no matter what plug was in that boot? Wires look to be in good condition, I don't see corrosion at either end...
  11. ab59

    1985 evinrude E20CRCO misfire

    Oh? Didn't I test the wires for spark and find that I did not get spark from the bottom wire? This is why I ordered the power pack. Was there something else that would cause one wire to be dead? Plug wires are in good condition. No really, am I missing something here? About coils, is there one...
  12. ab59

    1985 evinrude E20CRCO misfire

    Ok, it looks like the bottom plug is not firing. I hooked up a timing light, hooked it up to the top plug wire and pulled the starter rope, and got good spark from the top plug, but the bottom plug wire is getting no fire at all. I just ordered another power pack. Hope this solves the problem...
  13. ab59

    1985 evinrude E20CRCO misfire

    Thanks for your reply. I will take that advice in the order you gave it. I almost went out after dark and pulled the plugs to test for fire in the dark so that I could see the arc better but am smoking a pork butt for the church tonight so it will be ready tomorrow. It does start right up first...
  14. ab59

    1985 evinrude E20CRCO misfire

    I just bought an old 1986 Crestliner 14' aluminum boat with a 1985 Evinrude 20hp motor on it. I put a new water pump in it, some new oil seals on the driveline, and changed the lower oil. It started first pull and ran a bit with no problem then began a heavy misfire or cough. It will clean up...
  15. ab59

    Howdy all, been a wile. Wiring harness for a 1994 Lowe 22 ft deck boat

    Well guys, first off, thank you for your replies. I guess I already knew the answer when I was writing the post. Never hurts to try though. I will take the advice of labeling, removing, and laying the harness out to copy it. The cheap skate in me wants to just replace the chewed up parts but...
  16. ab59

    Howdy all, been a wile. Wiring harness for a 1994 Lowe 22 ft deck boat

    I bought an old 77 Starcraft aluminum and then a Lowe 22ft deck boat also aluminum a couple of months later. I have got the Starcraft squared away for now and am about to start on the lowe. I knew the upper deck trim was rotten but when I started looking for a key for the ignition I found that...
  17. ab59

    adding trim and tilt fluid-1986 Mercury 90hp side fill

    Ok, never mind, I figured it out. When I stopped bleeding it off before opening up the fill spout the problems went away and it accepted fluid and the rest went smoothly from there.
  18. ab59

    adding trim and tilt fluid-1986 Mercury 90hp side fill

    My trim and tilt slowly goes down but has no leaks. This morning I decided to top off the fluid. I raised the motor and locked it in trailering height. I bled off the system and then opened the fill spout on the side of the bracket and topped the oil off until it ran out. It did not take much. I...
  19. ab59

    1986 Mercury Inline 6 outboard intermittent or no reverse

    Thanks for your replies--- I tried to adjust the cable one last time and could not get it to lock up in reverse. When I had the cable loose, I shifted it into reverse by hand while I kicked the prop and still could not get it to lock up. In Neutral, I pulled the lower and installed the most...
  20. ab59

    1986 Mercury Inline 6 outboard intermittent or no reverse

    Thanks for the reply. The cables seem to be fine. I don't see any damage at the barrels, and no sign of fraying or kinks. I have some others somewhere around here but they are used as well but in a pinch, I guess they may tell me if the original cable is damaged. There isn't any difference...
Top