Search results

  1. dlogvine

    Running without Reverse Gate..?

    I believe the motor on 1993 Jazz is a 90 Force, you might try to look if it has been used in any other jet boats. Or try to see if reverse gate for any of the jet skies could be fitted for your boat.
  2. dlogvine

    1995 kawasaki 750 super sport no spark

    Jetski has a good compression, about 120psi on both cylinders. Cranks fine, but im getting a single spark and nothing after. Changed the stator, still the same issue. This time the stator is used Kawasaki original. Mechanic said the ebox is good. I'm running out of ideas.
  3. dlogvine

    Mercruiser 4.3L Just clicks once when trying to start! Help!!

    The battery is a little low, try to fully charge it before starting again. And if you shortcurcuit the poles of the starter solenoid, it should at least crank a little, clicking means your solenoid might be bad. But it is easy repair and pretty cheap one. Much cheaper than replacing the whole...
  4. dlogvine

    Aftermarket stator for 1998 kawasaki 750 xi super sport

    oops, I meant the engine upon crank gets one spark and then nothing.
  5. dlogvine

    Aftermarket stator for 1998 kawasaki 750 xi super sport

    I am trying to get this jet ski to run. Original magneto had 2 wires green and purple coming to the cdi unit. Several replacement CDI units that came with this jet ski as well as the ones i saw online had 4 wires. So i decided to change the stator to match CDI unit. However, i got an aftermarket...
  6. dlogvine

    Jet ski trailer 5.30-12 tire upgrade to 205 75 14 fail

    https://recstuff.com/pro-tips/radial-vs-bias-ply-trailer-tires-whats-the-difference/#:~:text=A%20radial%20trailer%20tire%20is%20constructed%20with%20steel,line.%20Benefits%20of%20Choosing%20A%20RADIAL%20Trailer%20Tire
  7. dlogvine

    1995 Kawasaki SS rough idle

    I just purchased a pair of jetskies. Technically one 1995 Kawasaki SS jetski with a 750cc engine and the other PWC is 1995 Yamaha Waveraider 1100. Later is running like a beast and has no issues, but Kawasaki has a problem with idle or low gas running. It chokes and feels like a strange push...
  8. dlogvine

    Kawasaki 900 zxi ,Top unit installation, piston rings keep slipping

    Did this with a friend. I was lowering down the top unit and he was adjusting the rings. After about 20 minutes all pistons were in and all rings were properly seated. However a couple words of caution, trying to install the top unit while the lower unit is still in the bay is a waste of time...
  9. dlogvine

    Jet ski title in Nevada

    Im thinking about buying a jet ski in Nevada, but am not sure what are the title laws there. In Arizona it is just a Game and Fish Department registration part for any boat or PWC. In other states the rules are different so im kinda concerned as to what to look for. The seller showed this, but i...
  10. dlogvine

    Jet ski trailer 5.30-12 tire upgrade to 205 75 14 fail

    Ill try to see if 13 inch wheels will fit. There is a huge difference in ride betweeen 12 and 13 inch wheels
  11. dlogvine

    Jet ski trailer 5.30-12 tire upgrade to 205 75 14 fail

    I just bought a pair of jetskies on a nice aluminum trailer that i would love to keep. Original wheels are 5.30-12 and they are old and cracked. The hub is 4.5-5 and my set of 14" wheels with nice and new Carlisle tires fit the hole pattern. Unfortunately, the width of these tires make them rub...
  12. dlogvine

    Bravo 2 outdrive not engaging when in gear

    Maybe i should just remove the lower unit without draining the gear lube. Let him learn the consequences of his dumb a$$ actions
  13. dlogvine

    Bravo 2 outdrive not engaging when in gear

    I think my buddy is now looking for a coupler in his driveway or in the front yard. I told him to look at the 30 gal trash tank filled up with beer cans and liquor bottles first. I hate when drunk people are trying to do stuff that they have no clue about and being helpful. It took me two hours...
  14. dlogvine

    1994 SeaDoo XP choking when starting in water

    Join DateJun 2020Posts28 1994 Seadoo XP carburator linkage setting
  15. dlogvine

    Bravo 2 outdrive not engaging when in gear

    The prop is not getting locked and spins in every shifter position. As for the loose coupler, that was my first question when i saw the lower unit in a pool of gear lube, if there are any missing parts. The answer was none, but since these two happy campers were already seriously filled with...
  16. dlogvine

    Bravo 2 outdrive not engaging when in gear

    Unless the coupler was in the upper unit, there was none on the shaft. And i was kinda surprised that it did not take any alignment of the shaft with the coupler when connecting the lower unit with the upper unit. Or possibly the shaft was misaligned with the coupler, which is pretty much...
  17. dlogvine

    Quick guide for making a new seat cover and replacement of an old one piece PWC seatcover

    Old polaris jet ski, seat foam was in bad shape, had to cover the seat with a thin layer of new foam and then covered with vinyl. Stretched well with heat gun. Original seaton the back of the second picture
  18. dlogvine

    Quick guide for making a new seat cover and replacement of an old one piece PWC seatcover

    Notice on purple seat i had to do a couple stitches on the back since i lost patience with stretching and heating it and just removed the corners for a better fit and sewed the angles. On Seadoo, teal comlor, did spend a couple extra minutes heating and stretching and got the same result.
Top