Search results

  1. M

    94 Merc 50HP - Won't Trim Up

    Serial # OD289720 I just installed a new trim motor and filled it up with oil. It trimmed down and actually trimmed up the first few times I tried it. Then it would only trim up every 3rd or 4th time you try it (relay clicking). Now, it won't trim up at all. The UP relay is clicking. I...
  2. M

    Need trim motor part # for 94 Merc 50HP

    Serial # OD289720 It's the trim assembly with one ram. Here's the diagram of what I have: I called a local outboard shop and they said Mercury replaces this pump with a different pump (better) that bolts right in. You cannot get the parts as listed on the diagram anymore, you have to...
  3. M

    Lower unit is toast, Upper seems OK...Now What?

    My lower unit is toast....My upper unit seems ok...my gear oil had water and metal shavings in it....Can I flush my upper and mate it with a "used but good" lower? If that doesn't work.... I have another upper but the U-joints are seized up... Can you take the U-joints and drive shaft out of...
  4. M

    Replace Alpha One with Alpha One Gen 2?

    I had an earlier thread about my drive problems, but I have a new question, so new thread: I have an 87 Alpha One with 1.5 ratio. I found an Alpha One Gen 2 (late 90s model) with 1.47 ratio for sale locally. What would I need to do to install the Gen 2 on my boat? Is it plug and play or...
  5. M

    Alpha One upper outdrive noise

    We were just cruising along yesterday, celebrating the birthday of our great nation when the drivetrain started making noise and vibrating the boat. My first thought was lower unit, but it was making noise in forward, neutral and reverse and it sounded like it was coming from the back of the...
  6. M

    Shift Interrupt Switch - Wiring

    I asked this in my other thread, but I guess it's too crowded with ignition talk to get an answer on the switch wiring. I just need to know if the Interrupt Switch is normally open or closed with the roller in the valley? Mine is closed, meaning there is continuity between the two posts when...
  7. M

    Trying to install Delco EST Ignition - not going so well

    I can't really verify what kind of ignition system came factory on this Mercruiser 5.7, but I think it was points. What I found on the boat when I inherited it was an automotive HEI unit. And it ran great, but I wanted a marine set up for safety reasons and the Delco EST was recommended on...
  8. M

    No voltage to Distributor/coil when warm

    1987 Mercruiser 5.7 I currently have an automotive HEI Distributor (My Delco EST arrives today and will be installed ASAP). It has one red wire (12v) and one gray wire (to Tach). Upon researching some wiring diagrams, I don't think the red wire is factory. It was probably wired up by the PO...
  9. M

    Alpha One Serial - Need Gear Ratio

    I don't know where you guys find info by the serial number, but can you tell me what I have here? OC440137 - Alpha One Serial # (350 Magnum Sticker)
  10. M

    Help ID my engine and carb

    This is for the Chris Craft in my sig: I don't have a Mercruiser stamp or tag anywhere on my engine, but I do have the #'s off the block. On the starboard side top of block in the rear above the starter is has 10243880. I believe this is a serial number or ID # of some sort? The Rochester...
  11. M

    Distributor / Ignition Questions

    So I bought the boat with an auto HEI Distibutor. I know of the safety concerns and I want to remedy this, but would like to stay with HEI or some other all inclusive distributor. What Marine HEI distributors are out there? Budget oriented, please. And how much power will I gain seeing as...
  12. M

    Prop selection for 22' Cruiser 260HP Alpha One

    I've had the boat about a year, but just got it running last fall and just now starting to really get it going and start tweaking things..... 1987 Chris Craft 230 Limited 2800 lbs dry (add about 1000 for people and gear + 80 gallon tank) 5.7L Mercruiser 260 (1.5 gear ratio Alpha One) Current...
  13. M

    50HP Mercury Oil Injection Problems

    1994 3 cyl 50hp Merc 2 stroke w/ oil injection I obtained this boat/motor about 2 years ago. The oil injection did not work. The oil reservior stayed full. So I just mixed my oil with the gas the old fashioned way. All the sudden the motor magically started using the oil from the reservior...
  14. M

    Mercury 50hp Serial Number...What year model?

    Serial Number OD289720...What is my year model? It's a 3 cylinder 2 stroke 50HP Mercury with oil injection.
  15. M

    Prop Guidance for Mercruiser

    1) Performance issue you are trying to correct. - Not sure yet. I'd like some opinions whether the boat is capable of higher cruising speeds / top end and MPG 2) Current prop manufacturer, model, aluminum or stainless as a minimum. - Boat currently has SS Merc 3 blade 13 3/4" x 21P...
  16. M

    Bellhousing Bushing Kit / Shift Shaft Bushings, shift shaft seal

    23-805041A2 is the part number I found on this website: Bell Housing Parts I called about 10 dealers in my area and no one has these in stock. I don't think mine was leaking, but I see it's a good idea to replace when you do the shift cable (I'm replacing the shift cable). I have all the...
  17. M

    Replacing Circulating Water Pump....Composite or stamped steel timing cover?

    5.7 GM Motor, Alpha One Outdrive. The boat is an 87 model but I know the motor has been replaced some time in the 90's. The circulating pump was leaking out of the weep hole so it's time for a replacement. I see they make 2 different pumps, one for the composite timing cover 18-3599 and one...
  18. M

    Help me ID this Alpha One

    I don't see a serial number on it. Where should it be? It came off a 1989 Galaxy Bowrider. The sticker on the back that you can't read says "350 Magnum". Need to know what the drive ratio is. I tried to sell it last year on craigslist, but no luck. I know it's pretty rough on the outside...
  19. M

    Stripped everything off for transom replacement, now what?

    1st Post....probably not the last 1987 Chris Craft 230 Limited with Mercruiser 5.7 / Alpha One (265HP I think) I've had the boat for about a year. Bought it from my wife's grandfather....so I know a little history on it. I knew it needed a transom, but didn't realize how rotten it was until...
Top