Search results

  1. Eric123

    90hp mercury tilt/trim won't go up or hold up under a load.

    This problem just started out of the blue. It didn't give any initial problems before. And it happens time i put the boat in the water. So it will do it when cold or after running awhile. Here is what i know: When boat on trailer: 1. The up and down function works fine on all 3 locations of...
  2. Eric123

    Commander 3000 upgrade to mercury 4000 control box help

    So my old control box was a commander 3000 and it had 3 wires on the tilt/trim. Now i upgraded to a mercury 4000 gen 2 and the tilt/trim has 4 wires. 1 which i think goes to the trailer assist, but my boat didn't have that. So what do i do with the wire? Do i connect it to the up wire...
  3. Eric123

    Need help with axle on Trailstar trailor

    I have a 1999 Tracker Pro team 185 with a 90hp mercury on it. I need help with the axle on the Trailstar trailor. I don't have any info on it and the service guy at Bass Pro still hasn't called me back. I am trying to find what the original axle is. Looking for what weight it was, if it was...
  4. Eric123

    1999 Pro Team 185 SE Trolling motor wires

    The on/off foot switch went bad on my motorguide 764 brute 24v/ 64lb. So while i was removing the wires from under the 2 posts on the switch i found 1 wire that was broken and the other end was connected under the other post of the switch. It looks to have a resistor in-line. But i don't know if...
  5. Eric123

    laser 2 a45 "the older style"

    hi, i have run accross a 20" pitch laser 2 numbers end in a 45 not the newer a 46. this prop has the square vent holes on the side of the prop in front the blades. can anyone share any info on this prop? pros and cons or personal use? thanks
  6. Eric123

    aerator pump suggestions

    Hi, i just pulled out the aerator pump on my boat. its a rude 500 gph and was wondering if i should go back with the rude or another brand? It is difficult to get to and is not made like the ones screwed to the hull. so i would like to get a pump that will last a long time :) thanks for any...
  7. Eric123

    Prop suggestions Please

    I am not asking for pitch or size, speed or hole shot. But what is a good brand of aluminum props to look at? I am new to the boat world and every prop maker on the internet claims to have the new best thing. I was just wondering a good brand or manufacturer of props? I am leaning to a aluminum...
  8. Eric123

    Prop removal tool

    I know it would be handy to have a prop removal tool. But is it necessary to get the prop off? Thanks and still learning :) Eric
  9. Eric123

    1999 Mercury 90hp crank but no start

    Hi, i had just got on the lake yesterday and got about 1/4mile out and the motor just stopped. Got a tow back in and started trying to work this problem out. Well the motor will turn over and over. sometimes with backfire from all the gas its getting. I have pulled the plugs i get fire on the...
Top