Search results

  1. M

    Bayliner....no clearance to remove steering cable?

    If you are going to hire it out, consider buying a hydraulic steering system with a 2 piece tilt tube rod. (Uflex, Seastar, Vetus, Mophorn etc.) You can saw or cut the old cable to remove it, and use the old cables to pull the new hydraulic lines. You will not have to remove or move the motor...
  2. M

    97 Johnson 40hp steering control

    I don't think this motor has a tilt tube, may need to add one or use a similar style transom mount bracket, but change the long rod that goes to the tiller bolt to something safer. I think the steering set up pictured actually needs to be moved back closer to the motor, and a proper steering arm...
  3. M

    87 Alumacraft Trophy steering

    Cut the steering rod /cable to get it out. Use the old cable to pull new hydraulic hoses fir hydraulic steering. Check Uflex, Seastar, Vexus. Mophorn etc.fir s complete kit. Best thing you can do to a cable steered outboard.
  4. M

    1998 Merc 150 Stiff Steering

    Maybe the tilt tube and/or the steering tube. Maybe the swivel on the motor itself Maybe one or both cables. By the time you buy a new twin rack helm and dual cables and have them installed, which may require taking the motor loose and then reinstalling it, you are getting really close to the...
  5. M

    Lone Star Model Question

    Nice looking boat. Show your photos at the Lone Star Boat Forums, they will help.
  6. M

    Replace frozen steering cable 1993 Trophy WA

    Hack saw the old cable, pull out what is left, replace it with hydraulic steering. Check some of the newer models with a two piece tilt tube rod.
  7. M

    1988 Evinrude 150 XP Steering Question

    I just did this with an older Merc 150, I used the Hyco 1, all good. Their fitment tables did not show my engine but the Hyco model I got was suitable for almost all other 150hp Mercurys, and you are right, hoses much easier to run than cables for only a little more dough. Remember to tie the...
  8. M

    converting to hydraulic steering

    Look at Seastar (now Dometic) and also Uflex to find a model that utilizes a split support rod that goes into the tilt tube. Thereby not requiring the motor to be removed. I just did this with a Uflex.
  9. M

    yamaha hpdi 150

    2.6L is a long lasting, great running Yamaha. Fresh fuel and filters, ringfree every tank, Yamalube or similar. Try to always run ethanol free with a good stabilizer.
  10. M

    Reverse lock out link

    Need to install a new link in the following: 1999 Mercury 25hp 4stroke remote control Serial number OG773638 Any helpful tips? Thanks in advance.
  11. M

    Can't pull up service manual for 7.4 ? LK series 97 year model.

    At the referenced Volvo Penta Global site I have tried three times to pull up the service manual for a 74GIPLKDCE, 4110145075, 1997 Volvo engine, 7.4L. It will pull up the parts and maintenance schedule, but not the service manual. When I enter the numbers for my older 5.7L it pulls up the...
  12. M

    Trim problem

    Hi, just purchased a new to me 1997 Cobalt 272 with 289 hours on the meter. It is powered by a 454 Volvo with a duo prop drive. Great boat. The numbers are as follows: Engine 74GIPLKDCE 4110145075 3868627 Transom TSK SX-C1 (gas) 4111555574...
  13. M

    Can't find Mercury outboard year.

    I'm trying to find the year of 150 hp Mercury outboard for a friend. I have tried 4 different cross references and none of them show his motor. The serial number he has given me is OTO66527. Any light you can shed will be appreciated. Thanks
Top