Search results

  1. K

    Fuel pump lines

    Thanks, I ordered a new fuel pump, I think my is on the Frits when I pulled the hoses off, the third one that goes to the block had some fuel in it.
  2. K

    Fuel pump lines

    I have a 1972 evenrude lark 50 hp, and a 1974 johnson 50 hp, the 72 has three lines going to the fuel pump and the 74 only has two, can someone tell me what the third line is for on the 72. Thanks
  3. K

    Low speed adjustment

    I have a 1972 lark 50hp, can someone please give me a straight answer on how to set the low speed jets. Manuel says start with 5/8 turn out on each one. Problem is, I read one article says you can’t set it on the muffs because you need the back pressure from the water, I got that, someone else...
  4. K

    Lower unit drain plugs.

    I have a 1972 50 hp lark, I am changing the lower unit oil, and noticed the screws don’t have washers or o rings , this is the second time I have changed it, no water in the oil, everything looks good. Do I need to put washers or o rings or just leave it be.
  5. K

    Prop help

    I have a 1972 evenrude 50hp it has a 13.25x17 prop pushing a 15 ft fiberglass boat , I don’t have a tachometer but my engine is not getting high enough rpm,s it’s not winding up like it should, any idea what prop I should be running. This is the original motor for this boat. Engine runs great...
  6. K

    72 Lark 50hp

    Howdy from Texas. I have a issue with a 72 evinrude with electric shift. I bought it about a week ago, and finally got it started you have to play with the throttle while turning the key to hit the lucky spot. I got it running on the muffs and shifted the gears to make sure they worked, it died...
  7. K

    Idle adjustments

    I have a new to me 1989 Cajun boat with a johnson 60 hp title says 89 model but according to the model number it's a 90 model. Model number J60TLESM. I need to know how to adjust the idle up just a little it idles fine on the muffs but when it's in the water sometimes it dies before I can take...
  8. K

    Ever see one of these

    This came off a 150 blackmax I bought a few yrs ago trying to figure out anything I can about it , numbers on it are 48-68560A4 23 Pitch Any help would be great Sorry cant upload photo says the file is to big
  9. K

    wont run after dying

    Hey everyone I sold a pontoon with a 1986 evenrude 110. The people who bought it called me yesterday from the lake said the motor was running fine for about 10 min. then died and wouldnt restart his wife was texting e she said it wast getting fuel , any way they texted all day and into the night...
  10. K

    Mercury 150 low speed problem

    I have a 1983 mercury 150, Ive had it for about three years and it has never ran right. I have posted on here before but never figured out what was wrong when i would give it throttle it would bog down really bad, I could keep messin with it and it would finally take off and run perfect untill I...
  11. K

    Cap assembly, oil reservoir

    A friend of mine has a mercury 150 serial no OD232575 and her cap on her oil injection system is cracked ,I was trying to find her one here on iboats but I cant locate it under anything i search for. It has two wires going through it and a float underneath it, if anyone could point me in the...
  12. K

    Have No Forward or reverse

    Sorry if this horse has been beat to death. I have a 1981 mercury 150 serial no. 6424308 just replaced the waterpump and thermostats, put it back together pumps water fine but no forward or reverse did the repair on the pump with the boat in neutral. I have a Seloc manuel just about as worthless...
  13. K

    Need help with ignition switch mercury 150

    My ignition switch fell apart , and i need to order a new one, but im having trouble finding a part no. If anyone could help I would be gratefull. The engine is a 1983 mercury black max 150 hp and the serial no is 6424308 it has the push to choke and 6 terminals on it. I didnt know if any of...
  14. K

    150 mercury still bogging,

    Quick recap, I have a 81 mercury 150 black max. It starts and idles fine, but if you put it in the water, and try to take off it bogs down, if you keep playing with the throttle and the trim it will finnally take off and runs perfect untill you slow back down then you do it all over again. But...
  15. K

    Will these carbs work on my merc 150

    Will these carbs off this 87 Mercury 175 HP S/N OB242396 work on my 83 mercury 150 SN 6424308 thanks
  16. K

    2001 minn kota 65 pounds thrust

    Need help please the information in the title is all I know I need to order parts but I need more information, please help. serial no MK ABFR 13004 any help would be great all of the labels are gone. thanks
  17. K

    update 150 bogging, I still need help

    Quick update my engine bogs down when you give it throttle if you keep messing with it it will take off and run good untill you slow down below ABOUT 2000 RPM. Mech rebuilt carbs, still the same called him he said it was over propped , new prop 19 pitch same thing called him he said it was the...
  18. K

    Im back last thread got locked, Mercury 150 no Power

    I have a 1983 mercury blackmax 150, took it to the mech to get the carbs rebuilt almost 300 dollars, put it in the water the results were the same idles fine give it throttle it bogs down, called the mech he said bring it back. I took it back 200 miles round trip. He rechecked spark all elec...
  19. K

    Can you outguess my mechanic

    Re: Can you outguess my mechanic Could this be my problem, only one vent jet in top and bottom carbs middle one has both, that would explain why it idles good and runs wide open good but floods in mid range, according to manuel those being open with no jet would make it run really rich in...
  20. K

    Can you outguess my mechanic

    Need help fellas my mech is killing me. I have a 1983 mercury blackmax 150, took it to the mech to get the carbs rebuilt almost 300 dollars, put it in the water the results were the same idles fine give it throttle it bogs down, called the mech he said bring it back. I took it back 200 miles...
Top