The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
2004 Glastron GX205SF with VP 5.0 GL-E with SX-M 1.6 outdrive
Ive experienced some slipping this year under a few conditions:
1) Loaded boat with 4 adults and 4 kids under way, 15mph or so, just under plane, and suddenly get slipping, like cavitation where RPMs go up quickly, but boat slows...
That time of year. Doing this myself, of course. What oil filter options do I have:
VP has these option in their bulletin P-21-7-1 (2005):
3850559 for 96x130mm
3852412 for 96x107mm
835440 for 96x96mm (used this on my old VP3.0!!)
I only see for the 5.7s and 5.0 the part 3850559, but my closest...
I just installed a new 3 blade aluminum standard rotation VP 3817468 propeller and in the garage am getting a slight rub on the front of the hub against the inside of my SX lower gearcase housing. The rub is just enough that it may for sure remove some paint and may remove some aluminum from the...
Re: 2004 VP 5.0GL-E SX-M 1.6 overheat in lake - not in driveway on garden hose attach
Found the problem. I used an electric vacuum pump from work and electrical tape to seal off areas to test the inlet cooling system. I divided things up until I found the section that would not allow any vacuum...
2004 Glastron GX205SF with VP 5.0GL-E SX-M 1.6. Love this boat!!
New boat this earlier year. Bought in Feb and couldn't lake test it. Shame on me! Got it for a fair price. Boat has low usage and it shows everywhere, except the lower unit. Was stored outside last winter and rain-ice developed in...
I'm looking to see if anyone would have the thread information on the top oil fill dipstick/plug. This location can be used to insert an eyelet hook to lift the sterndrive unit away from the transom shield.
It would save me from having to bring the oil fill dip stick into a hardware store to...
As the title says, I'm looking for one with casters that I can wheel the lower unit in and out of the gimble bearing housing with the greatest of ease and minimal swear words :)
I don't want to make my own in this case as I want a nice piece that works with the VP spacings. Prefer a nice metal...
There are two options for this part in the VP store:
Thermostat: VP 3587597 seawater kit
Thermostat: VP 3831426 freshwater kit
Since VP likes to call its impeller drive water pump the "seawater pump", which could draw in either fresh or salt water, the liberal use of this description by VP...
Have a new boat!!! :D
Engine: VP 2005 5.0 GL-E
Sterndrive: VP SX-M 1.60
Was looking to find some e-manuals here but it looks like these are print only. Is this correct for these below?
Manual part numbers:
Elec Fuel Ign 7743454
Eng Mech 7743372
Wiring 7743606
Old boat GS185SF...
Just looking for tribal knowledge is opinions of fuel injection on the marine motors.
I'm an electrical engineer and surely understand EFI much better than the carbs. Just haven't worked as much with carbs to fully appreciate the finer aspects of tuning them correctly. I can read a book, but...
1999 Glastron GS185SF with VP 30GS MWTR motor.
Still playing with the more sudden poor or dies at idle, lack of power performance on the lake, issues of my motor. Fresh gas, full bottle of seafoam in each tank full and still no luck. I installed an inline fuel-water separator filter this fall...
Been dealing with this now for the last few trips to the lake. Difficult to get on plane, no hole shot power, dies on idle, and plugs end up sooty and black or full of gas. To restart on the lake, I have to take out of gear, and give it 50% throttle and turn it until it starts to catch. It used...
Having running troubles with my VP 3.0GS MWTR motor. Dies on idle, power loss, now tending to overheat past the sub 150F normal temp.
Plugs 2&3 look black and sooty and plugs 1&4 are wet gas it certainly smells like, so Im guessing its not water.
I did have the boat running great the first...
I'm looking at the two universal Sierra separator kits that iboats store offers, and the difference is 1/4 and 3/8 fuel line.
I looked at my boat and the line only has a red stripe on it, but no markings that say 1/4 or 3/8. I assume it looks like 3/8 but just want to know if anyone has that...
Hi all
I'm looking to help a friend at work to get him some service manuals for his 1995 Glastron Volvo Penta engine and outdrive set-up.
Here is the info on his boat:
Engine:3.0 GS PHUB
Transmission Outdrive: Model # 3868159
Transom Assy: Model# 3868288
Appreciate any help.
Best Regards, Brent.
I see these tools for Bellows expanders for Mercs, but not for Volvos.
Is it neccesary to use these tools on a 1999 Volvo Penta SX-M outdrive to get the bellows back on?
U-joint?
Exhaust?
I'm trying to determine the tools needed to get this job done in my garage.
Brent.
Is it possible to just trim up the lower unit and pull the upper drive bellows to inspect the shaft, U-joints and possibly see the gimble area, check for water intrusion, while the lower unit is all still attached?
It seems I can see this, but I dont know if there is wisdom that says not to...
Hi. Long time lurker and fresh member. Just purchased a 1999 Glastron GS185SF with Volvo 3.0 (30GSMWTR) with SX-M 1.97 drive unit. Boat is in great shape for a 10 year old boat with a new lower gear housing and prop (2 weeks old), but everything else looks original and like new. Claimed indoor...