Search results

  1. 2

    Crusader Intake

    I am in need of a new manifold for my 5.7 crusader. I am having trouble finding the part, crusader part number 7151100. I can't not source this part anywhere. Most shops tell me its to old and they don't handle parts for this engine. It runs great, just has some rust and I would like to change...
  2. 2

    Trim Pump Replacement Number

    Does anyone know the replacement part number for a VOLVO SX-M1? I need to replace it and would like to have it before I pull it all apart. Any help would be greatly appreciated. Thanks
  3. 2

    Please help me ID this Volvo Outdrive

    Can someone tell me what Volvo drive this is?
  4. 2

    Mercruiser Exhaust Pipe Identification

    Coming off my Manifold/Riser I have a down pipe. I replaced the manifolds and risers about a year ago, but not these pipes because I could not locate them. Of course, one of them developed a pin hole so I would like to replace both. Its on a Mercruiser 350 Fuel Injected. Attached are a couple...
  5. 2

    Engine is still overheating

    I have a inboard mercruiser 5.7 with a throttle body. I have been having an overheating issue so I started with all of the main parts: Raw Water Pump, replaced impeller New Circulating pump Heat exchanger boiled and pressure tested New Manifolds and riser Inspected all hoses, no restrictions...
  6. 2

    Mercruise 454 Bravo Outdrive Help

    Can anyone help identify what drive I have: Engine: 0F800890 Transom: 0F832761 Drive: 0K096819 The boat has been in the water for about 6 years straight with no protection to the outdrive. It looks like electrolysis got the best of it and I need to replace the entire drive. There is nothing on...
  7. 2

    Mercruiser Water Pump

    Mercruiser water pump Does anyone know if there is an aftermarket (Sierra, EMP) replacement pump for pt #46-807151A8
  8. 2

    Motor/Transmission Mount

    I am currently looking to install a mercruiser engine into my boat, however all of the motor/transmission mounts are frozen and need to be replaced The engine is a carb'd mercruiser 350. Its an older engine early 90's that was just recently rebuilt. Its going into a straight inboard application...
  9. 2

    Yamaha 350 Second Station Gauge Help

    Added controls and rigging to my second station and I am having gauge trouble on my 350TXR. The issue I am having is the gauge that I bought is not matching up to the harness. The plug I have coming to the gauge is bigger than the input on the gauge. I was sold a 6Y8-8350T-01. I do have the...
  10. 2

    Mercruiser Distributor Cap

    I found a crack in my distributor cap on my mercruiser 350. Could someone please identify the cap? The only markings say Delco-Remy, not part number or anything. I have never seen one with the box on the top. I don't have any model number on the engine, it was just a rebuilt 350 with aluminum...
  11. 2

    Morse Steering Ram Leaking

    My steering ram started to leak and I am looking to replace the seal. I showed the ram to several people and no one was able to identify what seal kit was needed. I knew that you guys would have the answer for me or point me in the right direction. I am attaching several pictures which may help...
  12. 2

    Mercruiser 350 Intake Gasket/Thermostat Housing

    I am currently rebuilding my inboard Mercruiser 350 engine. I ordered a new Edelbrock 2506 Aluminum intake and I am having a problem matching the gasket. I was told the Sierra 18-0868 was the correct one. It is correct other than the water jacket is square on the intake and round on the new...
  13. 2

    Isuzu Marine Generator

    Hey Guys. My father purchased a 1966 41' Hatteras Conv. with a Isuzu Marine Generator. The genset ran good for the first few times we used it. However, this passed trip the generator stopped putting out power. I am not able to find a model or serial number on it anywhere. I had a mechanic...
  14. 2

    Mercruiser 305 Manifolds and Risers

    I have been trying to research manifolds and risers for my 305 Mercruiser 5.0 MPI, serial number OM669371. Seems I am not able to locate any though Sierra or Barr. Would anyone know the part numbers associated with the manifolds and risers for this engine? Thanks
  15. 2

    1990 Yamaha 225 EXTD

    I am looking at purchasing a boat with a 1990 Yamaha 225HP EXTD. I was planning on doing a compression test. Motor was rebuilt 6 years ago, owner estimates 300/400 hours. Is this the correct way: Pull all plugs, test each individual cylinder during a cold start with boat in neutral? Someone...
  16. 2

    Crusader 454XL Oil Sender

    Thought this would be a simple fix but turn out to be harder to identify then I thought. I need to replace the oil sender and everywhere I have been says its not a common sender. Can anyone Identify? Thanks
  17. 2

    IBoat Family, I Need Your Help!!!!

    I Boat Family, I am in need of your help. You guys have never let me down, and I am asking for one huge favor. I am trying to help my brother, Phillip Brimer, win a design contest on Facebook. He was asked to design a logo for this years upcoming Fat City Fest in New Orleans. My brother is a...
  18. 2

    454 Electric Fuel Pump

    Can someone identify this fuel pump. It is off of a 33' Tiara with a 454. The only number on the pump is 2143130A. I have attached a picture of the pump. Is this a sierra part, or something I should get at the local auto parts.
  19. 2

    Mercury 60 Tracker Tach Wiring

    Hi, I am in need of some assistance. I purchased this Mercury Tracker recently and I have it on the boat now. I am having issues determining the wiring for the tach. There is a plug connector coming off the harnedd as well as 4 loose wires (Red, White, Green w/ White Stripe, and orange). Can...
  20. 2

    Mercury 225 Trim

    Re: Mercury 225 Trim Here is another picture of the ram, any ideas?
Top