Search results

  1. S

    losing power 84 35 hp j/e

    Re: losing power 84 35 hp j/e this is the jet, it was clean. I put the float in upside down..........OMG this is why it run out of gas at WOT.
  2. S

    losing power 84 35 hp j/e

    I just finished replacing half the parts on my motor. including RR carb and fuel pump. replace fuel lines and the tank hose was replace last year also new filter. and its doing the same thing as it was before. It runs strong about5-10 sec i mean running perfect, then it stall for a sec. If i...
  3. S

    35 hpvacuum line?

    What is the 1/4 line that is connected on the block just under the carb running just back behind the fuel pump to a spicket on the side of the motor on a 1984 35 hp> What does it do?
  4. S

    shorting out

    I need the wiring harness with the red plug for an 84' 35 hp johnson motor side. I find them on ebay listed for other size motors like 80 and 100 hp. and also from the 1970 motors will all of these interchange with mine? if not. what yr and size motors will? thanks. the + lead (inside the...
  5. S

    84 35 hp help!

    Long story, last summer I was running the boat and it was fine, late in the day it got to were it would only idle, if i tryed to increase rpm it would stall. still would start and idle fine. I park it till now,I thought I would rebuild the carb this week, thinking the problem was feul related...
  6. S

    electric priming question

    If this works ... lol I posted a pic of the primer on here. where do all the small lines connect. mainly #15 and # 16 and were can I buy them?
  7. S

    cooling problem 35 hp

    I cant get water to the motor. I installed a new waterpump, housing,base plate and ss impeller housing, impeller is installed properly, I removed to double check it to day. I ran the motor til it got to hot for me... So I decide top pulled the side plate and see if the was blockage, after...
  8. S

    Water pump parts question

    Iam working On a 84 35 hp johnson, I installed a new water pump, however My motor uses a part that goes over the water pump and into the top of it. The manuals I have show that I need an O-ring on the top of my wp but does not name this part.or show the part. Mine was damaged from over...
  9. S

    Over heat-Rebuild

    I ran my 35 hp through the mud last night and the an hour later I lost power. Motor was hot. Ill be taking it apart to see the damage and I was wondering If these blocks can be bored larger. The crank shaft uses a barring , I would assume the connecting rod and crank should be fine. It will...
Top