Search results

  1. 2

    V/P osxi-G 5.7 lack or power and 1 beep every 5-7 seconds

    hey all, i got a bugger hear, took over this job after the owner felt their mechanic was just throwing parts at this problem, . no scanners, no fuel pressure gauges just flying by the seat of their pants. anyways, after replacing the impeller, then the entire raw waterpump assy, then the...
  2. 2

    2005 bravo 3 leak but no leak

    hey guy, i need some help. i got this boat with a bravo 3, the reservoir went low 2 times in the course of 2 days. i pulled the boast out of the water and it sat overnight with the drive trimmed down in the driveway., the next morning there was a stain at the tail end of the props. where the...
  3. 2

    bravo bellows job, design #2 water intake hose question

    im doing bellows on a bravo 3, the water intake hose has the plastic section going into the housing and the rubber hose has a clamp connecting the 2, one of those crush squeeze clamps you see on non reusable items can i/ should i cut the clamp off and install a new rubber hose or is it ill...
  4. 2

    why is there oil in my bellows but pressure test holds 15psi overnight

    i pulled the drive on my boat and there is oil in the bellows, lots of it. i drained and pressure tested the drive and find no leaks. could the drive be overheating and pushing the oil out of the input shaft seal? bravo3 drive,
  5. 2

    2009 4.3 gxi-j cant get it over 3k rpms

    i have this boat that will not get out of its own way. and its kicking my ass, i hope someone else has had a similar issue. it feels llike i have 6 fat guys sitting in the rear of the boat. the engine has 150hrs on it, the fuel pump module was replaced due to low pressure and noise, the screen...
Top