Search results

  1. D

    50 johnson ignition or carb problem

    Put my boat in the water over the weekend for the first time this year took a can of carb cleaner to flush out the carbs and as I was spraying it trough them noticed when sprayed cleaner trough the top carb it was like nitrus but spray trough bottom the motor would bog! Also noticed at WOT motor...
  2. D

    Plastic plywood?

    Im redecking my Ski Barge and found a lumber store that sales plastic plywood in 4x8 foot sheets. They say you can cut it just like regular plywood. The only catch is its 100 bucks a sheet and I will need at least 3 but it will save me alot of fiber glass work. Just wondering has anybody used...
  3. D

    thermosata test?

    I have a 50hp johnson model # 50372r Im getting a fine mist out of the exhaust ports. I know this motor has no tell tale. How do you test the thermostat. thanks
  4. D

    what to do?

    howdy folks. ive got a little bit of a problem. i replaced my 35hp evinrude with a 50hp evinrude i bought from a friend well i sold my 35 before i got the 50 home, put the 50 on my mckee skiff and low and behold its a short shaft. my boat has a 20in transom. i figure i got about 3 potions. a...
  5. D

    20 hp carb help

    i have a 75 20 hp ser.202hg, it has a tillotson md139a carb, the motor runs strong, good compression, changed the water pump, run a couple times and the carb takes a dump long storey short i was told i could not get rebuild kit or find a carb for this motor. a friend gave me a carb off a newer...
  6. D

    9.5 power problem

    i just rebuilt the carb and fuel pump on my 9.5, it idles fine but when i run it with the cowl on it seems to starve for air at full throttle as soon as i take the cowl off it runs fine. thanks for any help.
  7. D

    need 9.5 carb kit

    :cool:i came across a 72 9.5 a few weeks ago , runs ok but could use a carb rebuild. were can i find a kit . sierra only seems to have them for 9.9s.
Top