Search results

  1. T

    no steering at high speed!!

    Re: Steering, planing and kicker questions Re: Steering, planing and kicker questions Just wanted to let people know that I installed a new skeg and a kicker bracket that raises up and down. Both were a pain to install but I got the job done. Had to buy a bit that can drill through metal to...
  2. T

    no steering at high speed!!

    Re: Steering, planing and kicker questions Re: Steering, planing and kicker questions Let me know any other pictures you need me to take.
  3. T

    1971 1150 Hard Start and Shifting Issues

    Re: 1979 1150 Hard Start and Shifting Issues Re: 1979 1150 Hard Start and Shifting Issues How are my spark plugs looking? They don't look too bad to me. I wasn't able to get number 6 out because the shell of the engine is in the way. Trying to figure out how to remove it.
  4. T

    Can't tell timing marks

    I'm trying to do a sync and link on my 1971 Mercury 115 and ran in to an issue when figuring out the degrees from TDC. I see three dots on the flywheel but the sticker to find degrees is on the engine not on the flywheel... Does the 3 dots on the flywheel = my pointer? Any input? Thanks!
  5. T

    1971 1150 Hard Start and Shifting Issues

    Hey guys, I have a 1971 115HP Tower of Power that has a hard time starting and running. Here are the symptoms: The only way I can get it to start is if I spray some fuel directly in to the carbs Shifting the motor to forward will cause the engine to sputter and eventually die If it dies I...
  6. T

    Need help with 1979 Mercury 1150 Skeg Outline

    So my skeg was shaved off from the previous owner due to damage but I notice that at high speed the boat becomes hard to turn and hard to control. I'm guessing it's due to the fact that I have no skeg. :grumpy: I've been contacting companies that make bolt on skeg repairs however non of them...
  7. T

    Tilting the tower of power

    Okay... this motor is big and I'm having a hell of a time getting it out of the water when trying to get it back on the trailer... am I missing something here? I know there are electric trim and tilt mounts but those tend to be $$$. I don't mind lifting by hand but am curious if there is...
  8. T

    Painting the boat and need people to guide me

    Read this as a guide and also browsed forums for more info: http://www.simplicityboats.com/latexcarnel.html So here's what I'm using to paint everything (bottom and topside): Olympic 100% Exterior Latex Paint Bulls Eye 1-2-3 Primer Procedure: Fill holes and gouges with marine epoxy Wet...
  9. T

    Bought my first boat this week

    Hey guys, I bought my first boat this week for $900 on craigslist. I had my marine mechanic inspect the boat prior to the sale and he said it was a good deal and I'm pretty happy about it as I was hoping not to spend too much money on it. It is a 1978 CalGlass runabout boat with a Mercury 1150...
Top