Search results

  1. Woodstock60

    1959 Super Seahorse 35 hp remote cable assy.

    I have the above mentioned motor I want to restore. This model has a cable mount opening in the pan for what appears to be remote start, choke, kill switch and maybe more, it has 5 or 6 pins sticking out. I looked the part up and its 377278 cable assembly. I tried looking around at my usual...
  2. Woodstock60

    1962 28 hp spark issue

    This one has me baffled. followed procedure to wake a sleeper, as I have many times before. rebuilt carb, new coils, regapped points, sprayed in double oil mixture into carb intake while carb was off and cylinders. put in new plugs and added electric starter, Changed all gas lines to new rubber...
  3. Woodstock60

    9.5 carb

    I use this as an emergency motor so it rarely gets used and of coarse when I need it she wont start. Im constantly working on the carb, I have at least 4 of them and I just cant get it right. It seems that there are a few plugs on this carb that are always leaking air, What do you guys use to...
  4. Woodstock60

    1960 3 hp evinrude

    Does anyone have a manual and breakdown of this little guy? Thanks Quag
  5. Woodstock60

    33 hp lower unit seals

    Im resealing my lower unit and am having a bear of a time getting the old driveshaft and propshaft seals out. I dont have any seal pulling tools, does anyone have any suggestions on a home made tool or an alternate tool besides a hammer and chisle. Thanks... Quag
  6. Woodstock60

    1968 9.5 recoil repair

    Does anyone have any tips or tricks for fixing the recoil on this engine? Thanks Ronnie
  7. Woodstock60

    1958 super sea horse 35 hp broken piston

    Thats what I have. I want to replace it with one from a 68 evinrude 33 hp powerhead- looks the same but I can't find any info to confirm.... any takers?
  8. Woodstock60

    35 hp Super sea horse compression release

    I just picked up a 1958 35 Super sea horse, and allready had a 59. One of these motors I plan to restore and the other I plan to beat the crap out of on the bay. My question is can I remove the compression release mechanism on my bay motor without affecting the motor operation (beside the...
  9. Woodstock60

    18 hp electric starter.

    Hello Gentelmen, After a long absence from the forum I am back working on outboards. My question is this I have a 1959 (15028) 18 evinrude with an electric starter and a 1974 (25rl74) johnson 25 with the same starter, Will these starters and mounting brackets fit on a 1967 (18702r) 18 and a 1970...
  10. Woodstock60

    1955 seahorse 25 hp solenoid

    I added an electric starter to this motor and want to change the solenoid to a different model to fit under the hood better. Does anyone know if I can just swap out http://www.iboats.com/Sierra_18_5814_Solenoid/dm/*******.661624403--**********.503087038--view_id.173969 instead of...
  11. Woodstock60

    33 hp start and solonoid placement

    Well tommorrow is opening day for trout, so I had to finish up all the odds and ends on my restore project. I got some good advice from folks here on this subject and decided to wire the electric starter solonoid and start button in the following locations (see picture link) I went with a small...
  12. Woodstock60

    1995 Force 70 hp trim

    My friend has this motor and says it will trim up but wont go back down, is there a solonoid controlling this and if so where is it located. I told him I would go over and have a look I just need a little insight to speed things up. Thanks.
  13. Woodstock60

    Torque spec. for 1955 seahorse 25hp

    My manual oly goes back to 1956, cant afford the earlier one yet so can anyone give me the following info on RDE-17. 1. torque value for piston bearing caps 2. torque value for head bolts 3. Crankcase cover has a spagetti seal, does it require the special sealant as well or no sealer just the...
  14. Woodstock60

    1955 johnson 25 hp head gasket

    I ordered a head gasket from Laing's outboard for this motor (model # RDE-17) and the gasket was pn# 302583. Laing's listed it as pn# 3865. When I received it today all of the bolt holes lined up but the copper rings that seal the piston to the head were 1/8" bigger than the original. I looked...
  15. Woodstock60

    Engine cover decal and emblem

    I recently posted that I was working on making my own decals for a 33 evinrude after finding them for $70.00, I purchased " waterslide decal paper" online with mounting liquid for $20.00, 10 sheets of which I used 2 and I bought a can of Krylon glossy acrylic clear sprey for 4 bucks. So...
  16. Woodstock60

    Walleye in the North East

    Are there any walleye fisherman from the NE here, particularly New York or New England?
  17. Woodstock60

    33 evinrude restore complete

    I just wanted to thank all the pro's on this site for helping me with this project. I asked a ton of questions and tried to answere some others that I felt I might be able to contribte something. Attached are some links for photos of my motor and some before photo's of my new project: 1955...
  18. Woodstock60

    double pole double throw (DPDT) switch

    Hi, in an earlier post about wiring a 33 hp solonoid and push button, Chris1956 mentioned a double pole double throw (DPDT) switch, I don't have the room to mount a switch and a push button because the kill switch is in the way, what I want to know is: can I hook up the double pole switch so...
  19. Woodstock60

    33 evinrude project solonoid placement

    Here are some updated photos, almost complete. I only have the hood , which is a wreck, and I have to figure out where to put the solonoid and the battery wiring and where to put the starter button. The lower motor cover I had to use was off of a non-electric motor so there are no spots already...
  20. Woodstock60

    33 evinrude 1968 fuel connector

    When I disconnect my fuel tank from the outboard gas leaks out of the connector for several minuets, its just a small amount, but it stinks and posses a fire danger. I dont know why there isn't some sort of check valve inside to stop this. I checked all my older models and they are all the...
Top