Search results

  1. R

    Alpha 1 Gen 2 connector

    Alpha one gen two, 2000 Bayliner 2150, 5.0L I removed my lower unit and I believe I broke a connector that attaches to the stem pictured. Not wanting to take a chance, I would like to replace it CAn someone tell me what it's called? Thanks!
  2. R

    What size Prop

    I was happy with the performance for the most part. That being said I don't have allot of experience for which to draw on.
  3. R

    What size Prop

    I have a 2000 Bayliner Capri 2150 Open Bow. 305 V8 Alpha 1 Gen 2 It currently has a 14.5 x 19 Prop that must be replaced Can anyone suggest an all purpose prop?
  4. R

    Rubber exhaust Pipe fire

    2000 Bayliner I/O 5.0 Mercruiser Took boat out and ran it for an hour or so. As I slowed down smoke was rolling from the engine compartment. Apparently the rubber exhaust pipe on the exit side of riser was burning up. i cut it open but never saw flames but used fire extinguisher anyway. The...
  5. R

    Mercrusier Riser

    I have a 2000 Bayliner 2150 with a 5.0 Mercrusier in it. It has been overheating at high revs and I believe a leaking riser is the problem. Seems to be leaking at the bottom at what appears to be a plug. (Rust) I understand a dry joint riser is better to install. My question is.. does the...
  6. R

    1986 Starcraft Bowrider repair manual

    How would I go about obtaining one? Thanks
  7. R

    I need to replace steering cable

    on my 88 lowes pontoon. I took cable off but it has no indentification markings at all. Its a rotary style. I've noticed that there are a couple different brands Uniflex, Morse and Teleflex. I'm wondering if they are interchangable? Thanks in advance
  8. R

    Evinrude Trolling motor lower unit rebuild

    I brought this used evinrude trolling motor and it wouldn't run so i troubleshooted it down to the lower unit. When I took the lower unit apart out came water. Of course everything is rusted inside. Can you all give me some pointers on cleaning it so I can get it running again? Or maybe finding...
  9. R

    Info on two evinrude trolling motors

    I have acquired 2 evinrude trolling motors and would like to find out some info on both of them such as: # thrust, volt, year The model numbers are BFL4PV.97 and BFL4PP.98 any help would be appreciated
  10. R

    Tach/trim question

    I have a pontoon boat with a 1984 Mercury 90 hp inline six on it. It also has a commander control box. I would like to install a tach and trim gauge (it currently has none) While I realize there is a harness that connects the tach to the Commander box. I'm wondering if that same harness would...
  11. R

    Problem with drain plug

    I have a 84 Lowes Pontoon boat I can't get the drain plug out of one of the pontoons. The head is broke off so I can't grab it. Its in there pretty good which is how the head got broken off. I don't think its leaking however I would like to be able to drain the pontoon anyway. What are my...
  12. R

    inline 6 not firing on 2 4 & 6

    I have what I believe is a 1980 Mercury 90 hp inline 6 I have been having a problem with it idling fine in my yard but once I put it in the water and shift it into gear it stalls. Then it floods out and will not start. Carbs have been rebuilt Anyway I checked the plugs based off of advice from...
  13. R

    Timing on Mercury 90 hp

    early 80s<br />I replaced the crankshaft and pput motor back together however I need to set timing but dont know how. Not even sure crank and flywheel are even in the same position as before. Any help would be appreciated.
  14. R

    Bad crank on Merc 90 hp

    I have a Mercury 90 hp outboard 6cyl. inline believe early 80s sn# 06399494<br />THe problem is the engine runs fine but prop will not turn in forward or reverse. It quit working as I was accelerating and now no longer turns at all.<br />I have determined by removing the bottom half of engine...
Top