Search results

  1. E

    What are these pads made from?

    As you can see in this proline they have these tan pads that are very rock solid that were used to bond the deck to the subfloor. I plan on building my deck by putting 3/4 on the outer edge. I posted on here a while ago and was prompted to keep digging for wet foam, rotten stringers & transom...
  2. E

    Boat not as fast as expected?

    yep
  3. E

    Boat not as fast as expected?

    Might not be vacuum but its where my speedo gauge has a vacuum like line that goes to the little thing that sticks in the water.
  4. E

    Boat not as fast as expected?

    I'd like to run low 50s. A 200 is probably a good size. The boat is rated for 150 but my face plate is not on my boat. Is there any legal repercussions for going 50hp over?
  5. E

    Boat not as fast as expected?

    I have a 1993 proline 19 footer center console that is paired with a 1983 Evinrude 140HP. The Motor still has the old 17 pitch OMC prop however it is still in fair shape no chips or warps. Under wide open throttle, the boat sits at 5500 RPM. However, my vacuum speedo says 34 mph, and my GPS says...
  6. E

    How many gallons of resin?

    This is a 19 foot boat with a 10 foot long by 6 foot deck. I plan on putting down 3/4 ply with 1 layer of csm and one layer of 1708 ontop, and 1 layer of csm on bottom. How much polyester laminating resin should this take?
Top