Search results

  1. zippy83

    Bent skeg on outboard

    Thanks everyone. I was able to use the hammer and a block on the opposite side and carefully bring it back to as close to normal as possible.
  2. zippy83

    Bent skeg on outboard

    Can I use one of those disposable homeowners torch yellow bottle? If so, how long should I heat the skeg from each side before attempting to straighten.
  3. zippy83

    Bent skeg on outboard

    Hi all, I was drifting down the wind and hit a log with my outboard. Even though it was trimmed up it was hard to see and the result ended up being a bent skeg. Is there a way it can be bent back?
  4. zippy83

    Water in the powerhead

    On my outboard the drain plug is completely submerged under water. It has been checked and seems to be not leaking…
  5. zippy83

    Water in the powerhead

    Thanks for the reply. I guess I can keep my eye on it. I told them to check out thermostat and see if its showing good. It is 2 years old and might be the issue.
  6. zippy83

    Water in the powerhead

    Hi all, I have a 2021 mercury pro xs 200 and during my last oil change I noticed that there was some water in my oil. For the first 10-15oz the color of the oil was milky and then te rest of the oil looked normal (dark brown) I took it to the service and they told me that its NORMAL for some...
  7. zippy83

    Outboard life expectancy

    Thank you all. Looks like regular maintenance will go a long way.
  8. zippy83

    Outboard life expectancy

    Hi all, I always wondered if a outboard is well maintained how many hours can be put on one? When I was searching online for an answer I found some enswers to be anywhere from 750 to 1500 hours. Seems a bit low in my opinion. I have a 2021 mercury pro xs 200 with 120 hours on it. What can I...
  9. zippy83

    Broken Skeg

    They said they will grind off whats left and weld directly onto the gearcase…
  10. zippy83

    Broken Skeg

    I will look at that as well. Im dead center in the midwest. There isn't much around here
  11. zippy83

    Broken Skeg

    There are two places that I can go to. One of them said they dont weld and the other guy gave me a run down how this whole thing needs to be one solid peace. Suggesting a new lower unit.
  12. zippy83

    Broken Skeg

    This one is completely broken off. I called my dealer and they said they will check out the lower unit to make sure there is no other damage.. If there is no damage they said they will send it to Mercury to weld a new skeg on. Estimate for that was $650 with shipping. And 30-45 day lead time.
  13. zippy83

    Broken Skeg

    I agree
  14. zippy83

    Broken Skeg

    I have two units with two different maps that have been updated last month. Neither showed any rock on this spot.
  15. zippy83

    Broken Skeg

    Hi all, I have a 2021 200HP Mercury pro xs.. I recently hit a rock and broke off my skeg. I know there are options to weld on a replacement skeg, but I would Rather do an insurance claim and get the lower unit replaced. Any advice other then watch where you going? Thanks Zip
  16. zippy83

    Deep Cycle battery polarity issues (24v)

    here is the wiring... The only other thing I can think of is the battery charger... I have contacted the dealer and they said that they can test the battery charger to see if there is something wrong with it.
  17. zippy83

    Deep Cycle battery polarity issues (24v)

    I looked into the charger that I have NOCO Genius Gen 5 x 3 on board charger. it is a 3 bank charger, each bank charges the 12V battery individually so if the settings are correct (to chanrge a 12V battery and not a AGM or Lithium battery) it will charge properly. There is no 24V option since it...
  18. zippy83

    Deep Cycle battery polarity issues (24v)

    Yes... it is a digital voltmeter.
  19. zippy83

    Deep Cycle battery polarity issues (24v)

    right now I have the problem battery outside. When I look at the battery checker tool (separate tool) it shows me that Negative is Positive and positive is negative. When I take my external charger and hook it up to the battery as it should be (positive to positive, negative to negative) it...
  20. zippy83

    Deep Cycle battery polarity issues (24v)

    It's a three bank charger, and yes all batteries are connected individually. As far as I can tell when I brought the new boat the configured charger for the batteries.
Top