Search results

  1. 5

    Brand new stator faulty causing my no spark?

    ok, ignore this whole thing... it was the stator. I put in the old one that was missing the yellow wires and it fired right up. Guess I am ordering a new one and seeing if sierra will refund or at least send me another one I can use as a spare.
  2. 5

    Brand new stator faulty causing my no spark?

    I have been fighting with a no spark issue on my 1979 115, I replaced everything electrical on it. Sometimes I get spark, but most of the time I do not. So I have started testing the new parts to see if they are faulty right out of the box. I checked my sierra stator and I think it might be to...
  3. 5

    1979 115 ADI no spark, everything is new.

    I will do some grounding checks today and see what I come up with. I did clean or replace all grounds. Might just order a brand new key switch also and see what happens. Yes I have spark without the orange wires. The boxes in the picture are the old boxes, I was getting no spark with the...
  4. 5

    1979 115 ADI no spark, everything is new.

    Just did a keyed switch change over since I realize that when I pulled the control box down is when I got a uniform 1.2 volts across the orange wires. So I put in a spare keyed switch, now I am sitting at 1.9 volts across the 3 orange leads with key on, and ground with key off. I have no clue...
  5. 5

    1979 115 ADI no spark, everything is new.

    Just went out into the garage and played around some more with the motor. I now have 1.2 volts on all 3 of the orange wires. Should there be voltage there and if so, how many volts
  6. 5

    1979 115 ADI no spark, everything is new.

    Hello all, first time posting, but I have hit a wall on my motor. Its a 1979 115hp, had been sitting for about 3 years. All the wiring was shot, so new Sierra stator, new CDI trigger, new CDI harness, new CDI coils, new switch boxes, new starter motor. The problem I am running into right now...
Top