Search results

  1. R

    2000 Johnson 90HP Broken Fuel Pump - VRO?

    Make - Johnson Year - 2000 Model # - J90VLSS HP - 90 Last weekend while out fishing on the Gulf we were motoring around and found that the motor was dying after running for just a second. The minute we kicked up the throttle the motor would starve for gas and die. We found that the manual...
  2. R

    Tilting shaft bolt removal ?? :confused:

    On my 87 Evinrude 25 HP, I noticed that the tilting shaft bolt (part 0319756) in the midsection (part that holds on the stern bracket assembly) was rusted very badly and probably could use replacement. The bolt is a carriage bolt with a nut and washer at the end. I was able to remove the bolt...
  3. R

    Cleaning a rusted out Thermostat ?

    So I pulled the head gasket cover off my '87 25 HP Evinrude to get to the thermostat (I believe this is the only way) and found the thermostat all rusted out and a ton of corrosion on the inside of the head gasket cover. What is the best way to clean everything out? thanks
  4. R

    Identify this knocking noise *VIDEO*

    Help. My evinrude 25HP is making a knocking noise and I dont know where it is coming from or if it is serious. The motor seems to run fine but I dont want to cause anymore damage to it by continuing to run it. Here is a link to a video that I took of it yesterday. The knocking noise seems to...
  5. R

    What size wire for MinnKota 40#

    I want to move my battery up to the front of my 14' john boat. I then want to install a plug on the end of the TM and a mount a receptacle near one of the rear seats. Q1: What size wire do I need for about a 12' run? Q2: Also where can I find the amperage for the TM (40#)? I want to make...
  6. R

    Rebuilding the carb 1987 25HP Evinrude

    When rebuilding the carb do I need to remove these? If I do remove them what are the installation procedures to put new ones in? They look like they have glue on them? thanks
  7. R

    Broken Carb?

    I recently purchased a used 1987 Evinrude 25 HP and it quit on me while out on the river. It will start and idle very rough but dies instantly when given throttle. When I took apart the carb I noticed a crack in one of the parts (pics 1). I think that is the high speed jet???? The other broken...
  8. R

    1987 EvinRude 25HP Fuel Line Connection Question

    I recently acquired an 1987 Evinrude 25 HP, and the fuel line connector on the engine (the connection from the primer bulb to the engine) is very tight of a squeeze since the tiller handle is arm is in the way. I am wondering if someone put the connector back in the wrong direction. As it is...
  9. R

    Help Identify the Year

    I picked up a used Evinrude outboard off of craigslist with the model number of E25RCUR Is the year number the CU or the UR? I was told it was an 87 by the seller :mad: thanks !
  10. R

    ?? Color and Clear coat questions ??

    I have a 14' Aluminum jon boat that I have been working on restoring. The outside of the boat is in good condition but the inside it terrible. This is what I have done. 1. Sanded the interior paint down. Bare metal in a few places. 2. Used rustoleum metal primer (2 coats) 3. Used rustoleum...
  11. R

    Tohatsu 9.9hp to 15 hp?????

    I recently purchased a used Tohatsu M9.9C and someone told me that there was a upgrade that could be done to boost the hp from 9.9 to 15. Is this information correct? If so does anyone know what the part number is? thanks -N
Top