Search results

  1. S

    Trim sensor adjustment

    I think that when the engine is DTS and has only smartcraft gauges, only the digital three wire sensor is connected and sends the position signal to gauges. The limit is then set by ecu... Am i correct?
  2. S

    Trim sensor adjustment

    Hello. Besides some other issues i have to my boat, i can not adjust the trim sensors. The engines are 377Mags DTS Axius, serial 1A605669 & 1A605670. I bought for both engines the kit with the digital three wire sensor on port and analog sensor on starboard side of transom (8M0107462). I read...
  3. S

    Axius repair on used boat Cobalt 303

    That would be perfect!! US-FGE33003K910 #3632 These are the labels at the back of the boat concerning hull ID. Thank you very much!
  4. S

    Axius repair on used boat Cobalt 303

    I will get access to this service manual and hope help me solve my problems. Thank you so much, you gave me directions to follow!!!! I will post again when i try all we mention and i hope to have good news.!!!! Thank you again!
  5. S

    Axius repair on used boat Cobalt 303

    we did not make anything for bleeding the system......besides, there is no i formation about bleed the system in Axious service manual, so we supposed that the bleeding will be made it self during use, just like power trim .....
  6. S

    Axius repair on used boat Cobalt 303

  7. S

    Axius repair on used boat Cobalt 303

    Yes , the serials are 1A605669 & 1A605670.
  8. S

    Axius repair on used boat Cobalt 303

    Concerning the 50% available power, i must check the starboard engine which tvm is fully working if it has this guardian limit as well........normally it should have 100% available power....
  9. S

    Axius repair on used boat Cobalt 303

    Maybe i must send an e-mail to Mercruiser with engine's serial and ask them if the PCMs i have are these which the engi es left factory....
  10. S

    Axius repair on used boat Cobalt 303

    Is it possible with G3 to make something like uninstall the current software of CCM and install from beginning the version 0076 as engine pcm sais to the orange sticker?...or if for some reason (as i bought the boat used without clear service history) the ccm have some other version, can i i...
  11. S

    Axius repair on used boat Cobalt 303

    What does it mean......is it possible that the pcms have been changed???
  12. S

    Axius repair on used boat Cobalt 303

    My engines are standard cooling. My pcm' are: 8M2015889 . And what is this orange label which say : use with version 0076 command module only - do not mix versions ??
  13. S

    Axius repair on used boat Cobalt 303

    The reflash of the tvm's is different than callibration? I am going to tell my mechanic to make a reflash...maybe something was not installed correct. The reflash is made by click the reflash button at G3 after choose the ebom? It will chose by itself which software to install, or we must choose...
  14. S

    Axius repair on used boat Cobalt 303

    Well, i repaired the harness, but nothing again.....i also checked the harness going from smart junction box to the engine and all the pins are ok ...i mean there is continuity between pins at start of harness and at the end... All i can think now is two things. 1. The smart junction box with...
  15. S

    Axius repair on used boat Cobalt 303

    I am checking again the continuity tests i made and i just saw something.The A1 pin from PCM (12v wake uppower) is connected to 3 pins of the TVM harness giving obviously 12v to three seperate circuits. These pins are B,C,D. In port engine D pin is not connected with A1 pin and obviously does...
  16. S

    Axius repair on used boat Cobalt 303

    I want to ask something else. Last year the engines worked in guardian mode 50% with no active fault when scanning with diacom. My mechanic told that this happened because axius tvm was not connected. In case that the problem with axius will not be solved (back to steering cable as last year)...
  17. S

    Axius repair on used boat Cobalt 303

    Yes. There is no connection between B and D pin of TVM 14pin connector and there is no connection between B pin (TVM connector) and A26pin and B23pin from PCM connectors. There is also no co nection between D pin(TVM connector) with A1 pin. At starboard engine these pins are connected. In...
  18. S

    Axius repair on used boat Cobalt 303

    Today i checked the harness and pin continuity. I unplugged the three connectors of the PCM555 and the 14pin harness going to tvm actuator. I wrote down the continuity of every pin from TVM going to PCM from starboard engine which's the actuator is functional and i made the same to the port...
  19. S

    Axius repair on used boat Cobalt 303

    Thanks for the info. You are asbolutely understood and i will tell my mechanic to get this info from MercNet. Comcerning the White Glove service bulletin v3, is there any number (like 8M0061781) to find it?? Many thanks again
  20. S

    Axius repair on used boat Cobalt 303

    My mechanic just told me that has access to all service manual, so this seems to be solved. My last attempt is to check if the 5V sender power or ground is interrupted somewhere and fix it. I will keep you informed how is going. You help me very much and thank you all !!!!
Top