Search results

  1. B

    1987 Evenrude 30 hp

    I was at a friends to help him replace the impeller. We got the lower unit split form the mid section but the shifter is still connected and for the life of me I couldn't not figure out WHERE its still connected. i did a google search for the parts list and a you tube search for a how to....A...
  2. B

    1987 Evenrude 30 hp

    I was at a friends to help him replace the impeller. We got the lower unit split form the mid section but the shifter is still connected and for the life of me I couldn't not figure out WHERE its still connected. i did a google search for the parts list and a you tube search for a how to....A...
  3. B

    1987 Evenrude 30 hp

    I was at a friends to help him replace the impeller. We got the lower unit split form the mid section but the shifter is still connected and for the life of me I couldn't not figure out WHERE its still connected. i did a google search for the parts list and a you tube search for a how to....A...
  4. B

    Manatee 19' Bowrider 1985 Specs?

    I have a 1985 MANATEE 19' BowRider which had a 115 yamaha on it. Im told the 115 is slightly under powered for this boat, I have a possibility of getting a 1986 Evenrude 150.....is it too large for the boat? I have been unable to find any specs page for this boat any where....any help? Ed
  5. B

    Our new boat project for 2014

    Re: Our new boat project for 2014 I ordered my new seats today I can match the colors to the sample swatches I have and order the rest of the vinyl for the front cushins and side panels. Progress
  6. B

    for sale section?

    Is there a section here to sell used yamaha motor parts? I dont see a FORE SALE section
  7. B

    Hull Foam....why>?

    I want to know WHY manufactures seem to fill the boat with foam under the floor. I cant imagine that small amount of foam being able to keep the boat from sinking or even add any flotation to it at all. From what I have seen in the boats I have worked on, all the foam did was trap water and help...
  8. B

    Our new boat project for 2014

    I picked up a boat form a really nice guy....He loved this boat, but the motor blew a rod through the block....so he decided it was time to upgrade. I bought the 1985 19' manatee which he awesomely took the floor out because it was getting soft, all the hard dirty work is done for me....The EZ...
  9. B

    Using Fiberglass in temps under 70*

    I know the product recommends using it in temps above 70*..... Im curious as to what results in using fiberglass is say 60* or 50* weather? Has any one done it and what were the problems...if any. I could deal with longer set up time, it might even be a positive in certain situations...but...
  10. B

    Yamaha 115 ob blown rod

    I have experience helping rebuild 2 auto engines so I'm thinking about tackling a YAMAHA 115 ob with a blown connecting rod. The boat, motor and trailer are FREE. The owner says it blew a rod, I don't know more than that yet. My questions are. 1- is there any tricks to seeing if the crank is...
  11. B

    Submersable lights

    I had issues with my last light system then went to a LIGHT BAR but then got a ticket for not having my plate permanently attached to my trailer. So on the new trailer I picked up a set of SUBMERSIBLE LIGHTS.... These are wide open on the bottom....I guess to let the water drain out lol are...
  12. B

    Winterizing an O/B

    Im getting ready to store my 18' and the motor is staying on it, covered but in the NY elements. What i do with anything else with a motor is.... run it dry then put a teaspoon of MARVEL MYSTERY OIL in the cylinder and turn it over without the plugs in it to coat everything then replace the...
  13. B

    1974 Grady White Value

    I have a VALUE question. I stumbled upon a 1974 19' Grady White O/B with a 1980 115hp Evenrude and galv trailer. I paid $100 for it all. The motor has even compression in all cylinders but I havent run it yet. The trailer is good all around with some surface rust. The boat on the other hand...
  14. B

    Boat Covers

    I have a 17 V hull run about O/B that I cover with a blue tarp...doesnt look very good in my yard but it does keep it dry and clean. Im looking for a fitted cover, dont want to spend over $100 and want it to last more than ONE season and keep the boat DRY.... is there such a thing? reviews for...
  15. B

    Trailer light set up

    Im on my second boat this season (17' v hull on a bunk roller trailer)...the last boat (17' v hull on a bunk trailer) i used a LIGHT BAR to keep the lights out of the salt water. It was a pain in the butt to be honest, and by NOT having my plate attached directly to the trailer, It got me a...
  16. B

    Weak pee stream hot also bad -weak pump?

    Re: Weak pee stream hot also bad -weak pump? I picked up a 80 hp mercury this summer..... when I started it, it had the same problem.... the picture shows what I found....
  17. B

    Leaking oil on Lower unit 1989 90 hp

    I have an Evinrude 1985 90 HP VRO that I used for the first time this past summer. It worked flawlessly in every way. In the end of season maintenance, I emptied the lower unit oil and about a pint of water came out. i NEVER checked it (yes, YELL at me ..I know i know I know) the guy i got it...
  18. B

    wire N cable boot?

    Re: wire N cable boot? Thank you again for your advice. I guess im stuck in my mindset and wanted rubber. I took a ride just now to my local marine store...they had a 3" rubber boot for $5 and a 6" rubber boot for $9
  19. B

    wire N cable boot?

    I am finishing up a restore of a 1972 sportcraft and I want to put on a rubber boot to hide the exit hole for the controls, wires and fuel line through the motor well. I see one item available, but its PVC and looks rigid. Im thinking about making a CV joint boot fit....is there something in the...
  20. B

    Why do i see "3 cylinder bad" on so many evenrudes?

    Im trying to learn more and get deeper into repairs on outboards. Im focusing on Evenrude because I feel they are more open and mechanic friendly. Im wondering why so many evenrudes I see for sale have a BAD #3 cylinder?
Top