Search results

  1. samm835

    Mercruiser 20ft Mariah taking on water

    At the beginning of season, I had my gimbal bearing, bellows replaced, impeller/oil all done. It does stay in the water and never took on water other than what was brought in after getting out of the lake. I am taking the boat back to mechanic tomorrow, but curious where could water be coming in...
  2. samm835

    1993 Mercruiser 350 w/carb, able to change EFI?

    I have a Mercruiser 350 in my boat with around 350 hours, she runs great but I am thinking I would like to add EFI to it. Has anyone done this before, was it easy to yourself and what was the rough price of doing it? I am fairly mechanical....so I prefer to save some $$$$ and do myself if at...
  3. samm835

    350 mercruiser/Alpha one-ticks when turns

    I have a 93' Mariah 20ft Talari with a 350 Merc Alpha one drive. I noticed the last couple of times we took the boat out when turning the drive sounds like it moaning/light ticking only when I turn. I am guessing it's the gimbal bearing that's going to need to be replaced soon. Am I thinking in...
  4. samm835

    7.4 merc 1996 Hard to start

    I have 1996 mercruiser 7.4 carb engine. I put two new batteries in last spring, along with Noco Genius charger. Everything ran great over the summer, I went out to the boat this past weekend to check her out and went to start her and the batteries seemed like they were half charged. I look at...
  5. samm835

    Mercruiser fuel pump tensioner help

    So I have a 96 mercruiser, I had to put a new v-drive belt on my fuel pump. I got everything on but I can't keep tension on it. Is there a trick to tighten this freakin bolt for the tensioner? I'm about ready to put a bullet in this motor lol!
  6. samm835

    Need 1996 Merc V-drive belts

    I broke my fuel pump belt. So since I'm going to replace that one I might as well replace the others. Does anyone have the part numbers and diagram? It's a carb 7.4 merc
  7. samm835

    96 merc 7.4 - New carb - install price?

    So recently bought a boat, prior owner put a non-marine carb on the boat.....yes I know, what an idiot! So a local marine mechanic is working up a price for me to get a new carb, vent hose off manifolds, and a tune-up on the motor. I will have his written estimate tomorrow, but I'm...
  8. samm835

    how to add anchor? 2855 cierra

    I have a 1996 Cierra, it doesn't have an anchor system. It does have a rope/chain hole, I but no idea how I can add. If anyone has added, pictures or your help would be great to read how you added to your boat.
  9. samm835

    96 Bayliner Ciera 2855

    I recently purchased a 2855, the boat at one time had a windlass on it. There is a small hole towards the bow starboard, near the front cleat. Its probably as big around as a coke can, will a standard vertical windlass work? It seems odd since its offset from the center of the boat. I have a...
  10. samm835

    Hard to replace steering wheel ?

    I want to replace my steering wheel for my Bayliner Cierra 2855. Is it a pain? Will I need a puller? Or it a take off a big nut, buy and replace?
  11. samm835

    1986 merc coolant reservoir bottle

    I have a merc 260 with a heat exchanger, I purchased the boat late summer and have been working on her since. I need to locate a reservoir bottle for my heat exchanger.....and then not sure how to place in my boat. Does it matter, high, level or below the exchanger? Anyone have pictures of their...
  12. samm835

    big difference between OEM/Aftermarket manifolds

    I am going to purchase new manifolds soon, but there is a considerable price difference between aftermarket and original. Any one have experirence with aftermarket ones being bad? I don't want to spend the time changing and find out they suck
  13. samm835

    merc 350 - what does an oil cooler do?

    My boat is closed cooler with an oil cooler. I've never had a boat with one. Its 1986 sea ray 260 merc, I am wanting to take it off today to make sure its clear of debris so was curious as to what it actually does and is it a pain to take off
  14. samm835

    1986 merc 260-heat exchanger

    Can a bad heat exchanger make your motor overheat? Rather than buying a new one, can an average radiator shop fix/rebuild one? I heard you can by-pass and make my motor no longer closed cooled (50/50), is that true?
  15. samm835

    260 Mercruiser - Still Overheating

    I have a 1986 260 (350) Mercruiser with closed cooling system. I have been having an issue lately with the motor overheating, I took the boat out, replaced the foot impeller(old one was in perfect shape). I have recently taken the circulating pump out and replaced along with all the hoses that...
  16. samm835

    1986 260 heat exchanger tube inlet

    My engine has been over heating when underway, its fine at idle. I took the drive off and replaced the impeller, I started to unhook all tubing going to heat exchanger. the starboard tube coming from I believe the block (larger tube) that connects to underneath the exchanger seems to be filled...
  17. samm835

    1986 260 water pump- sierra or mercruiser?

    I am buying a new water pump today/tomorrow, but trying to determine if I should buy sierra or stock merc. There is about 45ish price difference, is there a difference?
  18. samm835

    1986 260 - removing heat exchanger

    My boat has a heat exchanger. I boat only in fresh water. The heat exchanger looks original, I've heard these last 12 years. My boat is over heating, impeller is new, so I am thinking about just taking the exchanger out. Us this hard to do? Yes I will be testing other areas but would like to...
  19. samm835

    1986 mercruiser 260 350, what drive?

    I have a 1986 merc 260 in my Sea Ray 268. I'm not sure what drive I have. Is there anyway to know before I pull the boat out? If the engine serial number helps it's 6817129.
  20. samm835

    merc 260/v8 1986 overheating

    I have 260 and she Overheats when she moves. If sitting at idle or just above she does perfect, but once you start going she starts rising temps. I believe the drive impeller is new, and I just changed out the thermostat. Should I look next at the water pump on this? I looked for one on the...
Top