The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
Ok heres the deal I have a 1978 20ft bayliner Liberty I had no motor are out drive when I got it I have recently bought a mercruiser 350 with mercruiser stern drive I just found out that the gut that had the boat before my cut a bigger hole in the Transom for a Volvo penta drive my ? is how...
I have a 1997 WaveRaider model # RA700BV I just Bought this and ask the owner about the grease fitting for the Impeller bearing and he said he just pumped about 20 pumps of grease in it does this sound right are Should I be worried <br /><br />Do any of you guys have a Owners Manual you can...
I have just received a dewell tech meter I need to check my rpm but this only has a setting for 6 & 8 cyl 4 stroke not 2 I need to be able to use this for my v6 merc 175 this meter conects to negitive side of coil so my ? is this a 4 stroke v6 coil is goning to fire 6 times in 1 rev correct and...
I got a 1977 mercury 175 done the link & sync set timing everything for the last 3 years Ive notice it was idling high around 900 to 1000 in N in the water Ive done every thing to fix this the carbs have been resealed check for vacum leaks put 3 diffrent tachs on it set them all to 12 poles or 6...
I have converted my 1989 renken Inboard to an On outboard when I cut the transom down I cut it to where the cavatation plate was even with the botom of the hull after doing all my glass work and finalizing everything when I mounted the motor the cavatation plate is about 1.5 inches to 2 inches...
I have a 175 that holds 5 psi of water presure at idle and 15 psi at anything above 2000 rpm but will not pee at idle replaced poppet valve to solve this blow compressed air through pee hole it pees fine when rpms are increased but not at idle talked to a few of the local shops here and they...
On my 77 1750 175 it say in order to set timing there is three punch marks for my primary timing on the flywheel and two punch marks for my wot and not to use the two punch marks instead you have to put an aditional mark on the flywheel doing something with a dail indicater if it hasnt been...
I have a 1977 mercury 175 model 1750 ser 4589090 <br />I know how to set the wot timing but does anyone konw what the degree should be had some one tell me 2 degrees before tdc but that dont sound right so any help would be great I bwould love to take this boat out this weekend
1977 merc 175 model 1750 Boat was fine until last year arm on triger broke replaced triger set timing while i was working on it I replaced needle and seats in the carbs noticed they where leaking now my wot is only 4000 rpms floats set to specs and timing set to specs all cylinders have 150 to...
I've posted sevral times asking about my timing I have a 1977 175hp model 1750 I need help seting the timimg The seloc manual I have says to take all plugs out and use a dail indicater to find .069 and to mark the flyweel this has been done then it says to remove the time decal are paint over...
I have a 1977 mercury 175 model 1750 ser 4589090 my ? is how do I set the time I have no decal the manul say to set at cranking speed and line the mark with on the flywheel with the notch in the cowl dose<br />this sound right it dosnt give my any degee just to line marks with notch
I have a 1977 175 v6 mercury it will not put water out the tell tail at ideal period no water at all I have replaced the poppet complete kit replased the t-stats replaced the water pump complete kit siluconed around the water inlet pipe and it will not pee at an ideal if I cranck it up to about...
ser 04301235 my problem is when I am at ideal the moter idles rough at wot its fine I talked to a mecanic and he sad check stator so i did and this is what I come up with between <br /><br />blue& red lead rx1000 should=4.5-6.2 i get 6.0 good<br />blue/whit & red/whit rx1000 should=5.4-6.2 I...
