The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
I got a new used carb with same body # and when I opened it up the float needle was different. The one that came on the origanal carb had a "hat" that a retaining clip attached to and then attached to the float hinge but the other one did not it just sat inside the hole under the float hinge. I...
hey guys, I have a 79 55hp johnson and the bottom carb had a broken idle tube (the tube that is in the center of the carb through the middle of the float that is inside a larger tube) so I replaced it with a good clean used one.
GIVEN THAT THE CARBS ARE IN LIKE NEW AND VERY CLEAN CONDITION. how...
i have a 79 55hp johnson and my top carb is bad and i have an extra bottom carb. i was woundering. besides the linkage are the carbs interchangable from top to bottom? i know i would have to plug or cap off the large fuel line in the bottom of the lower carb but other then that is it possible?
i found some #'s on my 12" stainless 3 blade prop. 12 1/4 i'm assuming is the pitch. 18636 is another # the 36 i'm not sure about. There are also 2 dots above the longer #. any ideas
79 55hp johnson. I was cleaning my carbs when I found a tube in the bottom of my cleaner basket. it came from the center of my carb. its the 1/8 inch tube thats inside the larger tube that gose trough the center of the float. they are both brass. the bigger tube is ok. will it hurt anything? how...
i have a 1977 55hp johnson and i,m trying to take the prop off. i have the nut and the washer off but the prop still won't come off .i tryed using a block of wood and a hammer.
I have a 55hp 1977 johnson. i ran it for a couple hours first idle then ran at high speeds for about 10 minutes then at idle for about 45 minutes and finaly at full speed for 5 minutes before idleing to dock about 2 minutes. it ran great the whole time but when i tried to start it again it would...
I have a 76 7.5 ted williams.I got a 72 repair manual.Is thier many diferances
that i should know about? It is frozen and i have PB blast in it now for 2 weeks.If it dosn't turn over, is it easy enough to tear apart and rebuild?Is thier any words of wisdom for any of my endevors?
my ted williams 217/58588-0 has a spark plug directly into ths head and the wire goes to a square thing on the side with an angled side then another wire coming out towards the flywheel. what is it? sorry for the vaque discription.:confused:
I have a ted williams 7.5 model # 217/58588-0.
what year,oil ratio ect.
and what should i do or check to start the moter for the first time in years.
thanks in advance.