Search results

  1. B

    Bottom Refinishing Questions

    I am prepping the bottom of a 23 ft fiberglass cruiser whose previous owner would beach the boat in sand and/or clay. I will use the Interlux system (Surface Prep YMA601, Interstrip 299E, Epiglass HT9000, Watertite Epoxy Filler, Interprotect 2000E, and Micron CSC).<br /><br />My questions...
  2. B

    3M 5200, Permanent?!

    I replaced the transom boot for my cruiser 2 - 3 years ago and after searching the net, I used what was recommended: 3M 5200. I have now heard that 5200 is permanent and that I should have used 3M 4200.<br /><br />Does anyone have experience removing 3M 5200?
  3. B

    Mercruiser Exhaust Manifold and Riser Cooling

    In short, I am helping a friend install a rebuilt motor into his boat ... the boat was purchased motorless. The motor is a GM 350, 5.7L small block with the Rochester 4MV carburetor. We have purchased and installed the mercruiser exhaust manifold with the center outlet and the corresponding 3"...
  4. B

    OMC 260 (5.7 L) Oil Filter

    Does anyone have a part number (AC Delco, Champion, etc.) for the large oil filter that will work with this motor? I've heard that if you have the clearance, there is a longer (larger volume) oil filter that will easily replace the OEM.<br /><br />Thanks!
  5. B

    Opinion Eagle, Lowrance, Bottomline Fish Finders

    Hello Group<br /><br />I want to buy a depth finder for my cruiser. I primarily go boating in lake and reservoirs and after unintentionally beaching one day, I decided that I really need a depth finder. My internet search revealed that you get more for your money when you buy a fish finder...
  6. B

    Wheel Maintenance and Alignment

    I am a relatively new boat owner and this spring will be my first with a boat. I know how to prep the boat for spring, but what about the trailer? There are bearing buddies on the wheels and currently there is a surge brake system.<br /><br />I know that I should check the lighting and its...
  7. B

    Surge AND Electric

    Recently I posted a topic called "problems at launch?" Since that time, I have been researching electric drum brakes to replace the surge brakes on my trailer so that I have additional stopping power when backing down steep ramps.<br /><br />Today I had an interesting discussion with a trailer...
  8. B

    Spark Plug Wires

    Yes, I know that the ignition, electrical, and fuel systems for a boat differ from their counterparts in a car. However, are the spark plugs wires also different? I would think that an 8mm spark plug wire would be the same.<br /><br />What do you think?
  9. B

    Problems at Launch?

    I'm hoping to tap into the great expanse of expertise here in the group.<br /><br />I have a mid-size pickup with a V8 and a 5-speed manual gearbox and 4x4 drive. I took the truck to a weight station and with a full tank of gas, the truck weighs 4400 lbs. With me, the girlfriend, and some...
  10. B

    Info: Parts, Lift, Gauge

    Hello Everyone.<br /><br />1) I am looking for miscellaneous parts for a 1981 SeaRay Sundowner. I have found no source locally, through Goggle, nor through eBay. Anyone out there know of a parts boat or a supply house for this year of boat?<br /><br />2) Anyone know if the entire fuel...
  11. B

    FiberForm buy?

    A local merchant has a 1980 21 ft Fiberform that appears to be in excellent condition. There is not a scratch on the hull and the boat has not been re-painted. The seats are original, look like leather, and have not a mar nor the slightest indication of oxidation. Looking at the boat, you...
  12. B

    Worthy of a Project?

    I am a newbie, so let that color your response appropriately.<br /><br />Last week I bought my first boat, a 15' fiberglass 1963 HydroSwift with a 1976 85 hp Mercury outboard. The interior is relatively clean, but the previous owner painted it white. The seats were replaced maybe 3 yrs ago and...
Top