FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I was checking out a lower for a leak of milky lube. When I went to remove the Bearing carrier out to inspect the O-ring I Found the four retaining fasteners loose.I removed the retainer/carrier found the plate was cracked into several pieces. I removed the snap rings and the reverse gear to...
I need some info on the single piece exhaust manifolds for my 4.3. I have a problem with water leaking into the engine causing a slight milky oil water mix and starting problem when boat is restarted after sitting. Did these manifolds have a internal cracking issue that could cause water to leak...
I have a 1973 volvo aq170a series engine with a 270 drive with a possible overheating problem. This is what I found or done so far. I replaced the seawater impeller I have removed the circulation pump and exhaust manifold side cover and end cap to flush out all the rust flakes that was causing...
I have A 1988 7.5 king cobra that has a broken upper gear case housing along with the pivot mount. I would like to know if a 1990 upper will interchange with my lower and will a 5.7 pivot housing work with my upper.
