Search results

  1. T

    Rebuilt evinrude 115 lack of power

    Finally found a tester, all 4 cylinders go across 3/8” gap
  2. T

    Rebuilt evinrude 115 lack of power

    Cant find a spark tester but doing drop cylinder test nothing changes when unhooking the number one cylinder coil pack is new and tests good with a multi meter
  3. T

    Rebuilt evinrude 115 lack of power

    Yes I put them all on the rods the same orientation as old pistons
  4. T

    Rebuilt evinrude 115 lack of power

    It’s the vro pump with oil tank disconnected gas is mixed at 25:1 per the seloc manual break in procedure throttle plates are opening fully timer base is moving
  5. T

    Rebuilt evinrude 115 lack of power

    Compression is good couldn’t see anything in any of orifice plugs after spraying carb cleaner through and compressed air, unsure of spark gap or flywheel key will have to check. Prop hasn’t been changed since before rebuild and did fine previously
  6. T

    Rebuilt evinrude 115 lack of power

    It seems like it would be a fuel problem to me because it runs smooth it just won’t rev up all the way but I could be wrong
  7. T

    Rebuilt evinrude 115 lack of power

    Yes they are, it was rebuilt because a ring came apart and tore up the #3 piston
  8. T

    Rebuilt evinrude 115 lack of power

    I recently rebuilt my 1991 evinrude 115 but it won’t rev above 3,500 rpm and struggles to get the boat on plane with two people on it. Carbs have been taken apart and cleaned with carb cleaner
Top