Search results

  1. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    It seems Suzuki canada no longer sell the hose with the metering jet installed during manufacture ... just as two separate items. Just curious as to how to get the jet into the hose ...even with a little grease it's extremely tight? Thx
  2. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Thanks Mc Tool.....you've been extremely helpful....and patient!! :)
  3. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Thx Mc Tool....great explanation for a non mechanic like me. So if I understand correctly, any hose with an ID the same orifice as the brass restrictor should work? Would I be able then to get that size of hose to push onto the fuel pump nipple? It seems much larger? I think I found where I can...
  4. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    If you look at the photo I included,you will see the bottom part of the lighter grey hose is attached at the back of the carb.... I'm sorry, I don't know what it's called, but that's the one that needs replacing.
  5. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    From what I can make out, it's #2.....carb to pump
  6. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    99yam40....apologies, but the fuel pump diagram does not replicate my fuel pump. Both outlets on mine are one the same side, and side by side.
  7. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    It's the lighter grey hose in the centre of the photo
  8. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    The hose goes from the fuel pump to the rear of the carb.
  9. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    and this.... To replace the brass restrictor (or jet/orifice) inside the vacuum pulse line of your 2017 Suzuki DF2.5 outboard, you must replace the complete vacuum hose assembly, as the restrictor is permanently embedded inside the rubber line during manufacturing. Suzuki does not sell or list...
  10. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Think I have a problem.....here's what AI just pulled up.... "The "vacuum line" on your 2017 Suzuki 2.5 HP (DF2.5) outboard regulates the intake manifold vacuum to power the engine's mechanical fuel pump. Suzuki does not sell this as a single pre-assembled unit; instead, you can purchase the...
  11. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Mc Tool......so if I push this further down in the hose with a dowel or something that fits the ID do risk damaging the brass in any way?
  12. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Isn't that what the actress said to the Bishop?? :)
  13. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Thanks Mc Tool....just wasn't sure if it was pressed in or not....the original hose is okay so I'm glad I just have to push it further in....appreciate the help.
  14. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Sorry....just found it....its a 2017
  15. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Thx boscoe99....i do not have access to a parts catalogue.....and my serial number only gives me approximate year of motor...00252F-716531
  16. T

    Vacuum line for Suzuki 2.5HP 4 stroke outboard

    Hi all, Had to remove the carb on the above outboard as the fuel had been sitting in it for quite a while, and needed to be cleaned. When I disconnected the fuel pump, I noticed it was leaking, so I have ordered a new pump. I could not remove the grey vacuum line as it was deteriorated and so...
  17. T

    Replacing bulbs with LED

    Thank....I appreciate your help
  18. T

    Replacing bulbs with LED

    Thx matt167....is 194 the type of bulb I'm replacing, or the LED type? Thx
  19. T

    Replacing bulbs with LED

    Hi everyone, I'm having some difficulty in finding out the exact specs for my anchor light bulb. I want to replace it with an LED equivalent, but I'm not sure what to replace it with, as there are no markings at all on the existing bulb.... I've attached photos of the existing bulb in the hope...
  20. T

    Battery issue Mercruiser 3.0

    Thx bondo, Battery installed in boat with no charger attached reads 12.84v...when the stall happened, the motor did restart, but the turnover was very slow. When I returned to the dock after a 30 minute ride the battery read 11.2v....leads me to think the alternator wasn't doing its job. What...
Top