Search results

  1. F

    1997 5.7L thunderbolt ignition. Slow crank

    Welp. Disregard those, I don't really know anything about an engine I guess that's just the position the Pistons were in when I shut the engine off. Took the other side off and same thing so I turned the engine over a little bit and I see they move. All of the valves are moving properly on both...
  2. F

    1997 5.7L thunderbolt ignition. Slow crank

    Pulled valve cover. Those two have no movement The rest have movement 
  3. F

    1997 5.7L thunderbolt ignition. Slow crank

    Ok took the port valve cover off. I don't see water and oil looks good . I don't know how to tell if valves are bent , bad or whatever, but they all have movement, but these two. They all have a little movement but these don't move at all.
  4. F

    1997 5.7L thunderbolt ignition. Slow crank

    Oh ok, so need to know the configuration of the main harness? I guess that's what runs to the dash? So I would need to know if it's one of those 2 configurations, so any 350 V8 out of a truck would be one of those 2, and I just need to make sure it fits my plug? And I didnt know there was...
  5. F

    1997 5.7L thunderbolt ignition. Slow crank

    Ok. So I guess I'm going to start working on trying to find a new engine, And plan for eventually replacing it. But just out of curiosity on compatibility, if I were to find something like this , which looks like it's a complete drop in engine with all of the accessories , hoses, cables etc...
  6. F

    1997 5.7L thunderbolt ignition. Slow crank

    Oh wow, nice work! So the first picture is with the valve cover off the second picture is with the head removed?
  7. F

    1997 5.7L thunderbolt ignition. Slow crank

    Is it worth squirting some PB blaster in there?
  8. F

    1997 5.7L thunderbolt ignition. Slow crank

    If those tell you anything and you need some better pictures I can get some later it just got really hot out and I couldn't concentrate getting a better shot, my camera it's not that great
  9. F

    1997 5.7L thunderbolt ignition. Slow crank

    Here are a couple pictures from inside of my spark plug hole.. is that yellow stuff rust? I did spray WD-40 in all of the spark plug holes. And should those be in that position?
  10. F

    1997 5.7L thunderbolt ignition. Slow crank

    Oh and if I am able to do this, can change into one that's fuel injected? Or will that give me a bunch of incompatible headaches?
  11. F

    1997 5.7L thunderbolt ignition. Slow crank

    It is a 1997, 5.7L V8 , 2bbl, 350 , 260hp. I think that's a small block? What exactly would I need to know from the donor engine if it will work? I know I can get the failed engine out and bolt on All of the mercruiser parts necessary to the donor engine, except for I'm reading it would...
  12. F

    1997 5.7L thunderbolt ignition. Slow crank

    Okay I really appreciate you guys helping me diagnose this, I was completely stumped, and since I don't know much about the guts of an engine I figured something was going on beyond my ability. I'm coming to terms that I likely need to replace the motor.. It's lasted me for 15 years and...
  13. F

    1997 5.7L thunderbolt ignition. Slow crank

    Nope it doesn't.
  14. F

    1997 5.7L thunderbolt ignition. Slow crank

    Yes i haven't. I googled how to do that, I see ppl removing the short bolts, and then putting long bolts in the harmonic balancer, to wedge a pry bar in between and crank it? If so , how do I know what bolt to put in there, take one of them out and take it to to a hardware store?
  15. F

    1997 5.7L thunderbolt ignition. Slow crank

    Yes I've already pulled the drive. The only thing I see that is concerning, is one of the two black o-rings is missing on the drive shaft is missing , and the orange one at the that goes into the engine coupler looks like it was stretched and maybe twisted, I don't know if that's just from...
  16. F

    1997 5.7L thunderbolt ignition. Slow crank

    Ok. So the boat is not worth a 10k+ motor replacement, I'm reading a 350 "yard block" and switching all my Marine parts onto it would work. I can pull the motor and put it back in, but how do I know exactly what to get? Like how do I know the motor mounts would be in the same place for...
  17. F

    1997 5.7L thunderbolt ignition. Slow crank

    But if it's turning with the starter, ( although slowly) I would imagine I should be able to turn it by hand to some degree. Just don't really know what to be looking for or what to do if it's turning by hand, but kind of hard. It's obviously not completely seized up, It cranks at a steady...
  18. F

    1997 5.7L thunderbolt ignition. Slow crank

    Oh ok. Yeah the only thing I haven't done diagnostic wise, is turn it by hand, I don't really understand how to do it. I did try to turn the flywheel with a flat blade screwdriver when I had the starter off. It didn't seem like it wanted to budge , And I didn't know if it was supposed to be...
  19. F

    1997 5.7L thunderbolt ignition. Slow crank

    So toast?
  20. F

    1997 5.7L thunderbolt ignition. Slow crank

    Nothing else I can try to be sure? Just don't see how it would randomly happen. And if it was toast wouldn't it be completely seized? I just want to be sure before I give up
Top