Search results

  1. H

    trolling motor mounting location?

    I have a 16ft McKee Craft skiff and want to put a trolling motor on it ,the easiest place to mount is right in front of the side console which would put the motor on the side about 3 ft from the front, would this be a problem in handling or would it be ok? I have a 24v 70 lbs thrust motorguide...
  2. H

    2000 evinrude 115 hp fiche

    looking at a 2000 115 hp fiche evinrude with good history and about 450 hrs, compression is 122 to 125psi, what is your opinions on this motor and value:confused:
  3. H

    motor runs great then shuts down to fast idle

    :confused:I have a 1982 70hp Evinrude, it runs great about the first 5-10minutes then shuts down to about 1/4 throttle and wont go any faster,I have replaced the fuel pump and rebuilt the carbs and it still does the same thing,water pump put out a solid good stream while running so water pump is...
  4. H

    1993 120 johnson looper-HELP

    I Have A 120hp Johnson And Took It Out Ran Perfect At First But Then It Loss Power And Would Just Bareley Plane Off About 30 Mph With No Power ,when Returned Home Ran A Compression Test And All 4 Cyl Hit 135lbs, Started The Motor And It Was Running Rough And Unplugged Each Plug Until On The...
Top