Search results

  1. DamianJP

    Refreshing a 1982 9.9/15

    I usally anal enough to take pics when disassembling but I scewed up and forgot. Also have a manual but it is at a friends house. Its a E10SELCNS 9.9/15HP , has the 15HP carb, and I think it has the shims/exhaust to make it a 15HP. Carb Kit: Float setup , What do you measure the float from...
  2. DamianJP

    New to me Evinrude 9.9 (15hp) conflicting numbers 1977/1982

    Hey guys Just snagged a what a though was a 1977 9.9 from the numbers on transom plate. Powerhead numbers told a diffrent story, 1982 15HP. Classic bad idle/ carb job motor for $100. :) Transom Plate# : 10724A Crowley says 1977 9.9HP Evinrude Powerhead# :E10SELCNS Crowley says 1982...
  3. DamianJP

    Holding a power head up

    Hey guys I am taking my power head off my 1989 XR4 and re doing the seals and gaskets on it. Im using a 1ton engine hoist ( http://www.harborfreight.com/1-ton-capacity-foldable-shop-crane-93840.html ) and want to know when I get it off the mid section what is the best way to hold it up so I...
  4. DamianJP

    Need a FREE 88' to 93' manual for a 15HP Merc for Tiller Setup

    Iv'e seen some manuals posted for free on the stickies, but I cant find a Manual for my 1993 Mecury 15HP. My 15HP motor 0A197112 THRU 0D280999 I think it's in the 1988-1993 Generation. I need to set up the tiller handle, linkage and cable placement/setup. Now I can find a 6HP-15HP 1994 and...
  5. DamianJP

    Need Pic of tiller linkage/setup

    Hello I'm in search of a tiller arm and linkage for my 1993 Mercury 15HP OD243168. But I need a picture of someone's motor of the linkage side, throttle area and shift area to get an idea on how it connects and what parts I need. So If any one has a motor like mine please I need a pic for...
  6. DamianJP

    Flushing an outboard with NO muffs and not starting it

    Awhile back my friend said he saw a kit that could flush older outboards that had no flush fitting like the new ones have, and without starting the engine. Granted I like to flush my outboard while it running/warming up to get a GOOD clean but sometimes I can't start the motor up because some...
  7. DamianJP

    Need tiller handle / linkage for my 1993 Mercury 15HP

    Im looking for a tiller handle / linkage guts for my 1993 Mercury 15HP. OD243168 Anyone have anything that would help me out or know if some stuff on ebay would fit my motor? I see some stuff on there but im unsure of what I really need and what fits. Thanks...
  8. DamianJP

    Diagnosing exhaust in cooling chamber

    I have a friends 1990's Evinrude 25hp and its pee'ing steam with no water. I just did the water pump and after I did it the stream was what it should be with no overheating and everything was %100 for a couple of weeks to a month. He called me up and said it was pissing steam(no water at all)...
  9. DamianJP

    Need info for finding the right prop

    I bought a Aluminium Skeeter ZX 18 with a 1997 Yamaha 115 on it. My first aluminum boat so mabey its my operation error. The only markings on the prop is K-23 and I don't know if its a stock prop that came with the boat/motor package or if its a aluminum aftermarket prop. I think the 23 means...
  10. DamianJP

    Guest Pro 2613 older black model , starting lead not working

    I bought a boat that had a guest pro charger onboard. My current setup is I have a Everstart Marine starting battery that I use for cranking the motor and running the fishfinder , bilges , livewell. And I have a Everstart Marine Deep Cycle just for my trolling motor (12v right now). 2613 is a...
  11. DamianJP

    Need a Transducer XNT 9 20 T Humminbird

    Anyone have a used Humminbird XNT 9 20 T Transducer they want to sell? DamianJP
  12. DamianJP

    Gamefisher 5HP up and running, tweaking questions/vids

    Hey guys The Gamefisher 5HP is alive, Thanks to everyones help here. 50:1 TCW-3 Penzoil Small engine RJ12YC Gapped 30 80-90 Mercury Premium Gear oil I have some tuning questions. (Surprised? :D ) 1)What RPM should Idle and WOT be at? 2)Im not seeing much smoke come from exhaust , is this...
  13. DamianJP

    Can the throttle shaft assembly be removed?

    Can the shaft that the throttle "plate" connects to be removed after the plate is removed off of the shaft? 217 model gamefisher ESKA DamianJP
  14. DamianJP

    Water pump nuts / how tight?

    Is there a torque spec or just nice and snug? Same Engine 1985-86 5HP Eska DamianJP
  15. DamianJP

    90's Evinrude 25HP Water pump just done and worked, now no telltale just warm air

    Hey guys I worked on a early 90's Evinrude 25HP, the model number is now where to be found. :( Job went smooth and the telltale went from weak to pissing like a race horse and my friend was happy big time.Been about 3 weeks to a month and just got a call from him he said it started to get...
  16. DamianJP

    Oil Type/Ratio

    Yup you guessed it... the dreaded Gamefisher 5Hp model 217586612. Im getting totally two different answers about oil type/ratio. Some say TC-W (water cooled) is fine , others say stay away from the "W" and use air cooled 2 stroke oil only (like in lawnmowers / weedeaters). This manual that Im...
  17. DamianJP

    Simple spark plug question

    I have a #217-586612 Model Gamefisher 5HP (ESKA) It had a L87YC in it. Downloaded a service manual for ESKA's and it said to use a J13Y* for all AV520 AV600 AV750 AV817 Models. Than the * led me down to this text.. *Recommended spark plug after 1976 is a Champion RJ13Y I believe my...
  18. DamianJP

    Gamefisher 5HP shift shaft seal

    I got the drive shaft seal out , now I need advice on the shift shaft seal. Do they leak often? I didnt see any gear oil coming from the shift seal like I did the drive seal, but I thought while I was there just to replace both. If I have to get it out , is this a hard seal to get out. Looks...
  19. DamianJP

    I have a 1976 and 1976 55HP Evinrudes. Are these both commercial engines?

    Someone told me that all of Johnson/Evinrudes 55HP's from old to new are all commercial engines. 1977 55HP model is 55773D Is this true? It seems like its true because I have no oil pump, no tilt and trim , and the gear case looks bigger than what it should be. You look at a 40-50HP gear...
  20. DamianJP

    C-Series = Commercial motors???

    Does the C-Series motors mean that they are commercial motors? Does that mean they are more durable or what else is different than the non C-Series motors other than it has no oil pump? Thanks, DamianJP
Top