Search results

  1. Expidia

    Air ride seat posts?

    Because my rig is so small it's more susceptible to coming down hard on the occasional wave that gets by me or I didn't slow down quick enough or the wave turns out bigger than it looked :eek:. Sometimes they seem to appear from nowhere and can at times catch me by surprise. So I'd like to...
  2. Expidia

    35 Pics of Lake George, NY 6-8-08

    Lake George is 32 miles long, 3 miles wide at its widest point, with a maximum depth of 195 feet. Touted as the Queen of American lakes. It was 90 degrees, yet on the water it was very enjoyable. I wish these pics taken yesterday could do justice to what our eyes were seeing, but the heat...
  3. Expidia

    Prop for better hole shot when people heavy!

    Lotsa questions here . . . Boat is only 14'9" with the max rated 40 Merc 4 stroke ELPT. Rated for 660 for 4 people I think. Don't have the rating plaque in front of me right now. So with the stock prop it runs great with just the two of us. RPM's about 5500 WOT at 33-35 mph. But rarely do...
  4. Expidia

    Proper prop tightness with no cotter pin?

    Had to take the prop off my 2007 Mercury 40 4 stroke, because I nicked it on a submerged piling. Expected to see a cotter pin, but it is just this small bracket arrangement with two ears and the bottom of the bracket has two small holes that sit over two nibs. How much torque should I use when...
  5. Expidia

    Lower unit for 2007 Mercury 40 ELPT EFI?

    Hit a submerged log today while doing about 10mph. It took a piece out of the bottom of the skeg. I know I can run without it or put on one of those stainless replacement skegs, but I'd like to replace it with the OEM part. Can anyone give me a guess of what it will cost me to do it myself...
  6. Expidia

    Lost new roller already, what type welder?

    Please see question at end . . . 3rd trip using my 2 new self centering rollers. Got back to where I parked and 1 was missing. Rod was still hanging there on 1 pal nut so it could have fallen off or someone could have nailed it already. I just got back from a 3 hours drive from another lake...
  7. Expidia

    Pelican dry cases (for tools etc) The best!

    Saw these mentioned here from time to time. I was looking for a waterproof box to keep flares, flare gun, first aid, nuts, wires tape, tools etc. I got tired of having to dry out my tools 3 times last season, that I was keeping in plastic zip locks. I do have one of those $20 orange plastic...
  8. Expidia

    How may gal burned per hour for this upgrade?

    Looking to get a second boat. Will still be aluminum. Looking for a 221 Starcraft Islander model 2006-07 with a 150-200 Mercury 4 stroke 2006-07 (200 is max for this boat's model). Average 1-2 foot seas and 10-15 mph winds. Usage: I do mostly cruising around. Get it up on plane and throttle...
  9. Expidia

    Gas cap vent open or closed when trailering?

    I used to screw the vent cap closed on my portable 6.5 gal tank when I was done with boating for the day. Especially while trailering home I always closed it. It's not a built in tank, just a portable 6.5 gal that never leaves the enclosure that Lund builds into their boats. I use it with an...
  10. Expidia

    Got nailed for a $16 plastic gas cap . . .

    Last week on my first trip out on the Hudson River I realized that after I filled my 6 gal gas tank up at the gas station I left the cap on the gunnel. So the smell of gas was reeking and I used a small plastic bag and a rubber band to put over it, This same NY State Launch was right next to a...
  11. Expidia

    Winch walking a little ?

    From pics 7 and 8 in my link to Photobucket below (click on pic to enlarge) you can see the marks on the trailer frame where the upright with the winch on top is either walking a little when I'm cranking or from the boat pressing back and forth on the bow stop when trailering. I snug the bow in...
  12. Expidia

    Trailerable cover: Top Gun vs Sunbrella?

    Went to the Lund dealer. They want about $550 for the OEM Lund cover. Went to the canvas shop who made up my enclosure for me . . . Shop wants $475 plus extra for the supports. The owner suggested I don't use Sunbrella because he said Sunbrella stretches too much when trailering. He said...
  13. Expidia

    DSC . . . good article

    This months BoatU.S had a good article on how the 550 million dollar DSC rescue 21 network is taking hold for rescue situations. Only took me 5 minutes to connect the two GPS and VHF DSC wires together. Amazing system and technology available to us for a few hundred investment in new DSC ready...
  14. Expidia

    Self centering keel rollers X2?

    Does this make sense? I have a front (the one closer to the winch) standard rubber 8 inch roller mounted in a plate. I was thinking of getting a replacement 8 inch "self centering roller" for this front one and just reuse the plate and rod. For the back one (stern) I wanted to mount a roller...
  15. Expidia

    DSC and those tiny NMEA wires . . .

    Hooked up my NEMA wires yesterday. I was wondering what I was going to use short of soldering until I read about Scotchlok connectors on another boating site. They are also carried at Radio Shack under Radio Shacks own name so if you ask for Scotchloks the twits won't know what you are talking...
  16. Expidia

    Bought the Club Tire Claw . . .

    My biggest fear is getting back to the launch area and finding no trailer! I've read threads where this has happened to others. I get back late sometimes in the dark and sometimes 3 hours from home and even though I have insurance what do you do with your boat still in the water and no...
  17. Expidia

    Installed the PS200 (black box) VHF radio . .

    Oops, I should have posted this in Electronics . . . Picked up a Standard Horizon PS 2000 over the winter, new for $180. Nice weather past few days, so I finally had a chance to install it and the new antenna. Thought some would enjoy seeing my final installation as many here had recommended...
  18. Expidia

    2001 Lowe 140 S V side console?

    Looking at purchasing this model from a seller. Anything I should know about this model? Anyone know of any inherent problems? Supposedly, was not used much in salt water. Covered in winter and 1 owner. Thx
  19. Expidia

    2001 Evinrude 15 4 stroke ? good outboard

    My Daughter is buying a 2001 15 4 stroke. I don't have the model # yet but it was supposedly the first of their 4 strokes. It's a one owner outboard and he has two boats so the smaller one did not get as much use. Freshwater use. I've read a few threads here with a few issues. I'll run it...
  20. Expidia

    ? Minn Kota brand battery warranty . . .

    My Daughter bought two Minn Kota brand batteries at Dicks for trolling when she bought a canoe and a Minn Kota trolling motor from them last year. One of them won't hold a charge anymore for more than 20 minutes. A call to Dicks and they say she needs to talk with Minn Kota. Anyone know if...
Top