Search results

  1. B

    SX-M UJ

    Hi last year I had a vibration from the leg, the gimble had just replaced so I thought UJ,s . I ordered and fitted new cross members and it all felt better except for hard lock to starboard. It's not got any better and maybe a little worse now and I may even be able to hear a knocking most of...
  2. B

    Power steering pump

    Hi 3.0l GS power steering pump pulley needs replacing. I tried to remove it with a puller a couple of weekends back and it didn't budge, just bent the thing. I have straightened it but need to replace it. Any ideas on the best way to remove it and how do I go about fitting the new one? Thanks
  3. B

    Engine stalls

    Re: Engine stalls Hi Innstech1 I am sure the plugs are new but will change them any how. They cleaned up after I freed the choke. But I am not sure if the back fire ( or explosion in the exhaust) could of jammed the choke valve. As I had seen the choke work ok before my latest trip. Here is a...
  4. B

    Engine stalls

    Re: Engine stalls Hi fun times many thanks for your help. I just did a test all seems ok 3 at 175 and one at 160. The 160 is at the front of the boat. Do i need to do a raw water pressure test or does that prove the water system as well ? I took a pic of the plugs as well. Thanks
  5. B

    Engine stalls

    Hi just had an engine re built. Everything runs lovely on the muffs, took it out the first time and after an hour and some slow driving engine starts to run a little rough, going onto the plane it stalled. Re started but would not go into gear without engine dying. Left it a while then managed...
  6. B

    Windsor 351

    Re: Windsor 351 Hi ok I have managed to gewt to the boat and removed the filter and solenoids, def no restriction there so its either in the carb which a mate will look at. in the mean time the picture below is the distrib without the rotar arm doe that help in identifying which electronic...
  7. B

    Windsor 351

    Re: Windsor 351 Hi thanks for the replies. I just had a look at the distributer and no numbers at all on it. It took the top of and the picture below is what we have, does that help at all? I could not see a ballast restrictor but the coil has been replaced in the past by maybe the incorrect...
  8. B

    Windsor 351

    Hi our old 2001 is running rough, we believe this is down to the coil. We tried a coil from another boat and it ran much better. We have tried a standard coil but this runs very hot then we loose power ( we have lost a lot of power now even when it's cold) My question is does any one know what...
View older results
Top