Search results

  1. H

    Clicking noise in neutral

    After dropping my lower unit on my 1991 25hp Yamaha 2 stroke (25MSHP) to replace my impeller - which had no blades remaining - I was dismayed to hear an awful rattling/clicking noise after putting the lower back on. I’m assuming I screwed something up in the linkage... but I’m not sure what. I...
  2. H

    1958 18hp Fastwin Cuts Out

    I agree, they do seem to be set too rich. Definitely the next thing I'll be looking into once I figure out the tank/fuel issue.
  3. H

    1958 18hp Fastwin Cuts Out

    1958 Evinrude Fastwin 18hp model 15024 2 stroke, running 24:1 mixture This motor uses an old metal pressure style tank that as far as I can tell does not leak. This is my first 'pressure tank' motor and I'm still figuring out how the system works. My Fastwin will run - rough but run - for...
  4. H

    1958 Fastwin Not Getting Fuel

    Sorry, wrong nomenclature. Manuel fuel feed is what I was referring too
  5. H

    1958 Fastwin Not Getting Fuel

    Tank is clean. Filter is currently being cut out for simplicity. Fuel is very fresh and mixed 24:1. It starts and runs if fuel is squirted into the carb using the primer bulb, but there is no vacuum whatsoever. I’m just unsure of whether or not something other than a leak in the line or tank...
  6. H

    1958 Fastwin Not Getting Fuel

    These were old pictures on my phone from when I took the carb off. I have since put everything back together, attached all hoses, etc. These are not current photos. Sorry the the confusion I should have made that more clearly when I posted them
  7. H

    1958 Fastwin Not Getting Fuel

    Hose is not connected to filter bowl because I bypassed it with a clear fuel line straight to the tank to see if there were air bubbles etc running through. I also was replacing some aging hose clamps
  8. H

    1958 Fastwin Not Getting Fuel

    It has I added a few pics. I didn’t realize that’s what the air hose was for. I guess the carb has nothing to do with the lack of pressure then, right? I’ve got some clear tubing I know is 100% good. I’ll bypass the line and connector and feed it straight to the tank. That’s help me rule out...
  9. H

    1958 Fastwin Not Getting Fuel

    It’s a pressure tank. I assumed (hoped) the problem was in the lines but that does not appear to be the case. Absolutely 0 hiss when I remove the tank cap after running it so clearly it’s not building up a vacuum. I just don’t know where else to look other than the lines.
  10. H

    1958 Fastwin Not Getting Fuel

    Firstly: 1958 18hp Evinrude Fastwin model 15024 I purchased this motor close to a month ago and have been having trouble keeping it running. After waiting on a clear fuel line I have discovered that the motor does not pull gas in at all. Unless gas is directly pumped into the bowl it will not...
  11. H

    1954 18 hp Evinrude Fasttwin Frothy Exhaust

    Just went to my local boat shop and picked a pump up. I should have gone there initially instead of the auto parts store assuming they'd have something compatible. Thanks for the clarification. I appreciate the help
  12. H

    1954 18 hp Evinrude Fasttwin Frothy Exhaust

    Are they universal? I assumed that I'd have to buy one specific to my engine in order to screw into my drain plug. Years of wrenching cars is generous now that I reread it. Working on cars as a hobby and DIY fixes. I meant that in a "I get the basic concepts of motors" but as far as 2 strokes...
  13. H

    1954 18 hp Evinrude Fasttwin Frothy Exhaust

    2 developments from working on it today. I let the motor on its side and forgot it was primed and had fuel in it. A very generous amount of fuel came out. Have a broken a seal? Is this a clue to the initial fuel problem? Also, I cannot find a threaded hose adapter for the life of me that will...
  14. H

    1954 18 hp Evinrude Fasttwin Frothy Exhaust

    You're right. '58. I'm not sure why I had 54 stuck in my head.
  15. H

    1954 18 hp Evinrude Fasttwin Frothy Exhaust

    15024-15760 I should have included that. Thanks
  16. H

    Bolts ?

    Warming the engine up would help. Heat helps expand the metals and loosen things up a bit. Other than that, WD40 is your best friend. This is very good advice ^^
  17. H

    1954 18 hp Evinrude Fasttwin Frothy Exhaust

    Hello, all. To start off let me just say that I am not a boat guy. I've wrenched cars for years and am looking to BECOME a boat guy. Assume I'm an idiot and use small words :) I recently bought a 2 stroke 18hp Evinrude motor. 1954. It has fuel issues and needs to be primed constantly to stay...
View older results
Top