Search results

  1. alldodge

    Switching from Volvo TBI to Carb on a 1996 5.7 GI

    When cranking you should get 12V on pin 85 of the relay when cranking. If it's not there check to see if your getting 12V on the Yellow/Red wire on the key switch when cranking If 12V when cranking on key switch and not on pin 85, then it's probably the diode. Check for 21V on both sides of...
  2. alldodge

    Battery cable

    Use a measuring tape and get a ball park including the jacket. Go to local store and see what comes closest, and can always buy larger
  3. alldodge

    High RPMS instant rpm drop to zero and back

    I would look for a loose connection, maybe @racerone may have other ideas
  4. alldodge

    Battery cable

    Solid wire should only be used where vibration is not an issue. The current carrying capability is higher for solid wire but not that much more
  5. alldodge

    Battery cable

    Measure the diameter of the wire and do not include the insulation jacket https://www.firgelliauto.com/blogs/news/understanding-wire-gauge-sizes-awg-101
  6. alldodge

    Having Hot Start issues

    Welcome, looks like your using a parts cannon on the motor. Replace everything and you still have a problem. Replacing parts can add to and mask what is really happening. Must say you must have plenty of money to throw at it What is motor serial number? What was your fuel pressure readings...
  7. alldodge

    Maybe my turn for new boat time

    Either way my point is, it's not on a lift. I've had paint removed and re-painted but don't really want to do that again, but would be willing if cost was lowered enough
  8. alldodge

    Maybe my turn for new boat time

    Have been watching it and it's a slight "maybe". Hours are ok but it's been bottom painted and probably spent it's life sitting in saltwater except during the winter. There was a 2024 model in FL that was 20K more, but it's gone now
  9. alldodge

    Maybe my turn for new boat time

    Don't know what they would sell one actually for because a 2 year old with V8 is selling in the 280K range. So they sell much less or there is one heck of a deprecation.
  10. alldodge

    Maybe my turn for new boat time

    New is always pricey an new always list MSRP, and looking into performance V8 300 and V10 350 isn't much due to added weight Been in discussion with Formula in Decatur but they have no used currently. Sent me links to a 2025 with V8 and 2026 with V10 V8...
  11. alldodge

    Maybe my turn for new boat time

    The lock nut is item 30 and lock tab is item 31. Once nut is tightened the tab is bent to hold the nut
  12. alldodge

    MC TB5 Throttle/neutral issues

    If the cable was in the jaws then no
  13. alldodge

    1990 Force outboard 230ho removed upper bearing by cutting and left a crease need advice

    Which motors used crank 817400T3 ?
  14. alldodge

    Maybe my turn for new boat time

    My thoughts also Keep looking at a used Formula 310 OB, might be doing a trade if I can find the right one
  15. alldodge

    Yamaha F225 ECU Upgrade

    Don't know Yam's but don't see this as a ECU, this is the chartplotter setup issue. Most all have setup routines and it just needs to be setup in the menu
  16. alldodge

    Maybe my turn for new boat time

    Late follow up and something new Boat ran well all season, trim gauges in sync. End of season 2024 while changing the gear lube I found some water on the port side. There wasn't much but that was the reason at end of this season (2025) I wanted the dealer change it. Took it in a couple days ago...
  17. alldodge

    Shift interrupt switch

    Green/White wire? Post a pic of your distributor
  18. alldodge

    I/O (Sterndrive) Conversion to Outboards

    Drum roll
  19. alldodge

    Shift interrupt switch

    I'll be asleep by then, LOL
  20. alldodge

    MC TB5 Throttle/neutral issues

    I say Normally with a grain of salt, but normally to remove the neutral button the shifter is moved full forward and then the button can be removed. Removing it in neutral position can break part of the button inside All the button does is disengage the drive cable from moving forward. All this...
Top