Search results

  1. S

    1982 Johnson 50 Sea Horse - Constant Beep While Accelerating

    Nope, he later disclosed that he had removed the bolts but two of them broke off. Salt corroded broken bolts would have given us a clue that the driveshaft wasn't frozen in the powerhead. Alls good with the OP so their really is no more reason to post here.
  2. S

    1982 Johnson 50 Sea Horse - Constant Beep While Accelerating

    Does your motor overheat at idle? If so then yes pulling it apart will be better. Stuff can get hard as concrete.
  3. S

    1982 Johnson 50 Sea Horse - Constant Beep While Accelerating

    Well if your having trouble getting the bolts out then I'd pickel it in vinegar and see what happens. When I'm working on salted out small outboards, I pull the gearcase, turn the motor upside down, pour salt away down the water pump tube and let it fill the powerhead. Not perfect but helps...
  4. S

    1982 Johnson 50 Sea Horse - Constant Beep While Accelerating

    I use salt away.... saltchuckmatt. For a less expensive way....get a plastic barrel and put a couple of jugs of vinegar mixed with water. Run it at idle (if it will without overheating) for 1/2 hour or so and shut it off. Let it sit for a week then test again. Didn't you already pull your...
  5. S

    1982 Johnson outboard 60 hp 2 cly

    You will want to flatten that head now that it's off. Dead flat surface, 120 sand paper laying on the flat surface and do figure 8 patterns on it until it's shinny everywhere. Once you get it running you need to check head temp even if it's pumping water correctly. IR gun or check with your...
  6. S

    Videos on ETEC technology

    Good info....thanks for this!
  7. S

    Jet drive for 22ci 25hp Johnson/Evinrude ‘69-73?

    Sorry, forgot you were looking for an older one than they provide.
  8. S

    Jet drive for 22ci 25hp Johnson/Evinrude ‘69-73?

    This company claims too....also, omc must have made them...pretty common motor. Click on Evinrude Johnson, download, find your year and it shows the price https://www.outboardjets.com/jet-drives/
  9. S

    Pulling a boat motor.

    I believe your bolts are fine...grade 8 doesn't give and I think you want that. The threads are the week point I'm guessing. I have so many outboards, I have to hang them just to walk around in my garage!
  10. S

    Pulling a boat motor.

    Comes with two sets of screws, and could easily be reproduced. Pretty sure the screws themselves would hold the motor.
  11. S

    Pulling a boat motor.

    You can wrap a strap around the whole motor... Did that a few times.
  12. S

    Pulling a boat motor.

    The OMC one I have threads on the end of the crank and has 3 bolts. Bolt aren't very long. Pretty sure the three bolts alone and some cobbled together plate would hold it but that is far as I can go.... guarantee wise. I have a 30 hanging by the bolts and a steering wheel puller now.
  13. S

    Missing parts 1991 3hp

    I think your confused. 30 is a roll pin. The spot or Barb next to it is part of the carb, Your missing 31 and possibly 32 and a rubber hose? Or yes you have a 90 and your good I guess. Not sure how it gets it pulse though. Look for a barb fitting not being used off the block. Racerone called...
  14. S

    Missing parts 1991 3hp

    I can't tell what that second picture is....
  15. S

    Missing parts 1991 3hp

    31 must be the fuel line....part 30 is described as a roll pin and not used on some models.
  16. S

    2012 E-tec 25

    https://www.google.com/search?q=how+to+start+a+2012+25hp+e-tec+pull+start&oq=&gs_lcrp=EgZjaHJvbWUqDAgEECMYJxjqAhiMBDIGCAAQRRg6MgwIARAjGCcY6gIYjAQyDAgCECMYJxjqAhiMBDIMCAMQIxgnGOoCGIwEMgwIBBAjGCcY6gIYjAQyDAgFECMYJxjqAhiMBDIMCAYQIxgnGOoCGIwEMgwIBxAuGCcY6gIYjAQyDAgIECMYJxjqAhiMBDIMCAkQIxgnGOoCGIwEMgw...
  17. S

    2012 E-tec 25

    Okay, just got back to this....got the new rope guide piece back on and while better, it's still a beast to pull. Tried to get it to run but no joy yet. To back up, I had downloaded some E-tec stuff and I hit Crosby's stuff but when went to open his file or files it wouldn't open and said some...
  18. S

    1982 Johnson 50 Sea Horse - Constant Beep While Accelerating

    Ahhhh.....pond hockey and lobster rolls.....what could be better!
  19. S

    1982 Johnson 50 Sea Horse - Constant Beep While Accelerating

    All sounds great, go run that thing like you stole it!
  20. S

    1986 johnson 20hp tiller electrix start

    Pretty dirty but the butterfly is perfect. Get the kit and rebuild it. Red lines indicate where you can tap the nut to get it off. The tapping will leave a mark and that will tell you how to put it back the same way. The linkage on the left side will just pull out of the plastic socket if you...
Top