Recent content by WylieShoe

  1. W

    199170 hp force only runs when fuel is sprayed in carb

    Thanks for the input yes I had the fuel pump apart diaphragm looks like a new, took the line off at the carburetter crank the engine and fuel was coming out really good , yeah I’m thinking of missing something on the carburetter somewhere I’ll probably take your Advice and take it in somewhere
  2. W

    199170 hp force only runs when fuel is sprayed in carb

    Took carb off again cleaned blew it all out with the air compressor put back together still the same problem fires up after Enricher Solenoid is used sputters a little bit then dies
  3. W

    199170 hp force only runs when fuel is sprayed in carb

    Will try that thanks for the reply
  4. W

    199170 hp force only runs when fuel is sprayed in carb

    Yes the enricher solenoid is working it fires runs for a bit then quits
  5. W

    199170 hp force only runs when fuel is sprayed in carb

    Fuel pump is fine fuel is getting to the carburetter ,carburetter has been rebuilt, compression on all three cylinders is within the 10% difference new plug wires, voltage regulator new and new water separator and new fuel lines and squeeze ball, reed valves look good , Any ideas of what I’ve...
  6. W

    1991 70hp force ,will only run when fuel is sprayed in carb ,fuel pump is good ,fuel is getting...

    1991 70hp force ,will only run when fuel is sprayed in carb ,fuel pump is good ,fuel is getting to the carb,carb has been rebuilt ,new fuel lines and water Separator has been added, compression on all three cylinders is within the 10% difference new plug wires, voltage regulator, Any tips of...
  7. W

    Voltage regulator

    Anyone replaced a 1991 70 hp force voltage regulator 4 wire ,With a five wire voltage regulator off Amazon that has an extra red wire any thoughts would be great
Top