Recent content by wvmedic

  1. wvmedic

    remanufactured powerhead break in procedure

    Copy that, thank you. Jeff
  2. wvmedic

    remanufactured powerhead break in procedure

    Thank you folks for the comments. I am going to follow the 10 hour break in and re torque the heads at 10 hours. As for the VRO, I am deleting it. I pulled the powerhead and there seemed to be a good bit of excess 2 stroke oil in the exhaust to me. The VRO might be okay and I have a rebuild...
  3. wvmedic

    remanufactured powerhead break in procedure

    I need some help making sense of the break in procedure. OBR's website says to do a 10 hour break in. I get that, there are 4 parts that is confusing me. This is for a 1995 90 hp, my model is E90TLEO It reads in one part to retorque the heads at 10 hours after cool down, in another section...
  4. wvmedic

    Used or reman outboard

    I bought a reman powerhead from obparts, it is a OBR reman powerhead. Thanks, Jeff
  5. wvmedic

    E90TLEO water in cylinder

    I bought a remanufactured powerhead.
  6. wvmedic

    E90TLEO water in cylinder

    I have a 1995 E90TLEO, crossflow, flatback that has water in the lower left cylinder. Started as what I thought was a cylinder head cover gasket leak. It kinda was. So I replaced it and fired up the motor on muffs. It was still leaking, I re-checked the torque and it was in spec at 80 inch...
  7. wvmedic

    Used or reman outboard

    Thank you Scott, doesn't look like they have my powerhead available.
  8. wvmedic

    Used or reman outboard

    Factory spec, minus overbore.
  9. wvmedic

    Used or reman outboard

    No idea, that was my thought as well
  10. wvmedic

    Used or reman outboard

    That is probably my best option. I'm looking at Crowley now. They have a 100hp powerhead for the 90 degree crossflow lower to replace my 90hp crossflow. Do you know if they are reliable? Jeff
  11. wvmedic

    Used or reman outboard

    I need to replace a 1995 Evinrude 90hp that has a water jacket crack/brake somewhere putting water in the lower left/port looking at the motor from the back. I am in WV and used or reman outboards are hard to find. Any recommendations on a reliable source of used or remanufactured outboards...
  12. wvmedic

    1995 Evinrude E90TLEO charging

    So I got to water test it today. 13.22v at 900 RPM 14v at 4800 RPM That is with a meter at the battery. Jeff
  13. wvmedic

    1995 Evinrude E90TLEO charging

    I understand racerone and yes. It is pretty simplistic. But, everything is checking out to spec and there still appears to be a problem. As I said, I will water test this weekend and see if the higher RPM will produce more voltage. I really don't have much experience with this sort of thing...
  14. wvmedic

    1995 Evinrude E90TLEO charging

    racerone, what do you mean by that? Me to stop posting? I will water test it this weekend and see if the higher RPM will increase the voltage output. Jeff
  15. wvmedic

    1995 Evinrude E90TLEO charging

    Lead acid everstart size 24. Jeff
See more
Top