FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
1989 four winns 235 sundowner OMC cobra 5.7l 260hp. Just put a 19pitch prop on took it out w me and one other person WOT 4400 rpm. Put on 4 more people (500plus lbs) WOT 3800-3900. Is this okay? Opinions or suggestions? Thanks in advance
Is knowing the Diameter and the pitch enough info to get a new replacement prop? The guy at West Marine told me it would be.
I have a prop w current dimensions : J15 x 17 p. So as long as I get a prop with a 15 diameter it will fit my current setup? (My concern is I don't know if same...
Okay so i was able to get my boat out of the water and checked the information on the prop.
Prop's numbers are J 15 x 17p.
The other numbers on the prop were 48832628a45 (I'm not sure if the 6 was an 8 that didn't get fully stamped on but it was kinda hard to read, a couple of the 8's looked...
So I've figured out how to find a prop for my specific boat that'll fit, but obviously it links you to props at basically every pitch. Is there any way to find out what prop a specific boat came with from the manufactuer(including specific pitch). I get that you have to check where rpm was of...
Recently bought a used boat its a 1989 Four Winns 235 Sundowner so its a 23.5ft boat. My buddy works at a scrap yard found me a trailer thats in working condition (not worried about the looks) and was for a 25ft aluminum boat. Its has the rollers (see attached pic). Any ideas if boat will fit...
Hit prop on presumably some underwater rocks...stainless steel prop that when I checked took pretty good damage on each fin. It didn't feel like it hit all that hard but here is my question. Being its a stainless steel prop and it has significant damage the likelihood that it damaged the prop...
New to the mechanical end of boating, really trying to learn things. Purchased a used boat recently and prop got damaged on the drive home (had to bring through unfamilar area since didn't have a trailer) We still have a prop from our old boat (454 mercruiser). Our new boat has a 350 OMC...
