Scott Danforth's latest activity

The Noco comes with instructions

There are only 8 marine starters for GM bases motors 153 tooth flywheel (inline bolt pattern) or 168 tooth flywheel (straight across...

Jeff Foxworthy has a bit on glitter bass boats

Man, no way could I not dunk it before doing all the winterizing and checking. I would have to get at least one run in before doing...

You have an oil pan and dipstick on your current busted motor. Use them

Barr is the casting house that makes Edelbrock, PCM, Volvo Penta and Mercruiser intake and exhaust casting

In Grand Haven MI and hope to get our new boat on the hitch before lunch. It's 5:30 pm and we're going to have some Mexican in a bit...

you have to take teh drive off to align it. so why fight removing the motor by leaving the drive on.

remember, the drive comes off before the motor comes out.

aluminum is easy to weld if you know what you are doing. the pontoon logs are 5052 aluminum, so you would not want to use any of the...

GM and ford are not any better. most of the airbag sensors (required) on 17+ year old GM vehicles are NLA. so if your sensor dies, you...

yes, the fluid needs changing about every 5 years the slide pads wear and the shock may or may not be working as they only last a few...

V6s crack internally and externally, you can't save them with jb weld If you get a motor from a truck, you need to swap head gaskets to...

Oooh another oil thread

Was caught in rain on the ICW just outside Tampa Bay and Eggmont Key. GPS was useless as we were not able to go fast enough for it to...