Scott Danforth's latest activity

Yep, never turn a Chevy motor from the crank bolt. The usually strip out the threads in the crank

Just make sure to match generations of 3.0 The 1990 and below is slightly different than the 1991-2014

All the rubber parts are available from Taylor made https://www.taylormadeproducts.com/hardware/glazing-assembly-vinyls/ They may...

if the batteries sat for a long time in a discharged state, they may never take a charge. best is to pull them and put a charger on...

first, welcome aboard the pictures call in doubt how much of a stand-up guy the prior owner is the exhaust ports show that the exhaust...

We did not buy cheap, as the NoBo was $42k - MSRP was higher because it had every option available - solar, a cold weather package, the...

Yes, yes

You dont Bondo a dent. You metal work the dent out

Is your ignition advancing properly? 3 different carbs and same issue I would look elsewhere. Vacuum leak is also good to rule out...

I will say . . . I'm fairly impressed with the simplicity of the Honda & Dometic tech stuff. There is only a fraction of the...

Aluminum stampings would have been lighter and about the same price, with a higher load capacity.... I know they make them because you...

They are good motors, but tohatsu is just as good for much less money

those block-buster 2000 kits where you attempt to draw up cold anti-freeze are not recommended. light reading in the stickies on...

Frame will never be an issue again. The frame mounting where the axle is attached has been addressed, along with adding the 2x2...

is the paint coming of the mounting brackets?