Scott Danforth's latest activity

Being a 2025, it's still under warranty. Take it back to the dealer

Good thing they took it back You will need to prop for slalom skiing.

Do the acetone test after the visual inspection of the joint

If you have a problem with the block and heads, you follow the sound of the escaping air. Remember air tests must have all the water...

Grind out the weld with a 4-1/2" grinder. Then hit it with the flux core

Thats how the circuit I use works. it also works as a starter interlock preventing cranking once the engine is running.

you should see my overseas shipments thru Fed-Ex...29 out of 31 shipments required no less than 4 hours of phone calls to get the...

This is how I have the carter wired in my boat. (however double check the oil pressure switch terminals for the one you use)

countersink carriage bolts, then backfill the countersink area with caulk

did the mechanic clean the oil strainer between the transmission and lower unit? did the mechanic pull the whole drive apart to clean...

Actually cut way back on the consumption.

Im thinking of growing corn to distill into my next batch of boat fuel.

I will second the what engine are you thinking swapping from a 3.0 to a 4.3 or 5.0 or 5.7 can be done. however needs to have a bunch...

Welding and Planting are two things where penetration is critical

its like cooking an egg...... once you start, no undoing it.